机械毕业设计（论文）-压滚座工艺及钻M8螺纹底孔夹具计（全套图纸）.doc

PAGE V PAGE IV分类号： 无锡职业技术学院毕业设计（论文）题 目 压滚座工艺及钻M8螺纹底孔夹具设计 英文并列题目 The pressure roller seat technology and M8 thread bottom hole drilling fixture design 院 系 班 级 学生姓名 学 号 所在团队 指导老师（1） 职 称 指导老师（2） 职 称 答辩委员会主任 主答辩人 压滚座工艺及钻M8螺纹底孔夹具设计摘要：压滚座零件加工工艺及钻床夹具设计是包括零件加工的工艺设计、工序设计以及专用夹具的设计三部分。在工艺设计中要首先对零件进行分析，了解零件的工艺再设计出毛坯的结构，并选择好零件的加工基准，设计出零件的工艺路线；接着对零件各个工步的工序进行尺寸计算，关键是决定出各个工序的工艺装备及切削用量；然后进行专用夹具的设计，选择设计出夹具的各个组成部件，如定位元件、夹紧元件、引导元件、夹具体与机床的连接部件以及其它部件；计算出夹具定位时产生的定位误差，分析夹具结构的合理性与不足之处，并在以后设计中注意改进。机床夹具的种类很多，其中，使用范围最广的通用夹具，规格尺寸多已标准化，并且有专业的工厂进行生产。而广泛用于批量生产，专为某工件加工工序服务的专用夹具，则需要各制造厂根据工件加工工艺自行设计制造。关键词：工艺，工序，切削用量，夹紧，定位，误差全套图纸，加153893706The pressure roller seat technology and M8 thread bottom hole drilling fixture designAbstract: The pressure roller seat parts processing technology and drilling fixture design is the design of process design, including machining process design and fixture three. In process design should first of all parts for analysis, to understand part of the process to design blank structure, and choose the good parts machining datum, design the process routes of the parts; then the parts of each step in the process to the size calculation, the key is to determine the craft equipment and the cutting dosage of each working procedure design; then the special fixture, the fixture for the various components of the design, such as the connecting part positioning devices, clamping element, a guide element, fixture and machine tools and other components; positioning error calculated by the analysis of fixture, jig structure the rationality and the deficiency, pay attention to improving and will design in.Many types of machine tool fixture, wherein, the use scope broadest generaljig, sizes have been standa