毕业设计（论文)滚齿机自动控制系统设计.docVIP

滚齿机自动控制系统设计摘　要本文论述了以日本三菱可编程逻辑控制器（PLC）为主处理器、以欧陆数字式直流调速器590＋为控制器的滚齿机自动控制系统的硬件组成、辅助控制部分设计和他们的工作原理，总结了机床配套电气控制系统的共性特征，开发了滚齿机自动控制的完整系统。内容主要包括：系统控制对象介绍、电气元件参数的计算与选择、可编程逻辑控制器（PLC）及数字式直流调速器590＋的硬件接线和软件设计，相关软硬件的介绍，包括FXGPWIN（三菱公司PLC编程软件）。本次设计主要应用的软件是PLC，它是为工业生产控制而专门设计的控制装置，具有比通用计算机控制更简单的编程语言和更可靠的硬件，采用了精简化的编程语言，编程出错率大大降低。同时具有易操作性与灵活性。所以广泛应用于检测控制系统中。直流调速系统适用于一些大功率大扭矩的场合，且欧陆590＋功能比较多，可以实现多种逻辑组合推算电路，满足各种工艺控制要求，价格便宜，因此选用欧陆590＋作为控制直流电机的直接执行环节。关 键 词: 滚齿机，四象限全控数字式直流调速器，可编程逻辑控制器，FXGPWIN。DESING OF GEAR-HOBBING MACHINE AUTOMATIC CONTROL SYSTEM ABSTRACTWith the programmable logic controller of Japanese Mitsubishi (PLC) is a main processor, the automatic control system of Gear-hobbing machine taking 590+ digital direct current governors of Continental Europe as controller has realized that Roll the machine of Wheel gear automatic systems are designed, overcame and used a great deal of shortcomings of separating control system that the component made up in the past.This text has expounded the fact with the programmable logic controller of Japanese Mitsubishi mainly (PLC) is a main processor, the hardware of the automatic control system of Gear-hobbing machine taking 590+ digital direct current governors of Continental Europe as controller makes up, software system and controlling some designs and their operation principle auxiliarily, summarize lathe form a complete set electric generality characteristic of control system, develop horizontal automatically controlled intact systems of Gear-hobbing machine. The content includes mainly: The system controls the target to introduce, power component calculation, choice and digital direct current 590+ governor and programmable logic hardware wiring and software design of controller (PLC) of parameter, the introduction of the relevant software and hardware, including FXGPWIN (Mitsubishi Company PLC programming software)The design of the main applications of the software is PLC, which is the control of industrial production control device specific