毕业设计（论文）-于FPGA的图像采集系统设计与实现.doc

基于FPGA的图像采集系统设计与实现摘　　要 现在是科技迅速发展的年代，数字图像处理技术在这个年代中得到了迅猛的发展并在各行各业得到了广泛的应用。可编程逻辑器件(FPGA)凭借其较低的开发成本、较高的并行处理速度、较大的灵活性及其较短的开发周期等特点，在图像处理系统中有独特的优势。针对视频图像采集的可靠性和实时性，本设计采用Altera公司生产的CycloneⅡEP2C8Q208C8NK芯片，先由CCD图像传感器采集模拟信号，在经过芯片TVP5150将模拟量转换为标准的YUV4:2:2的数据信号，把数据信号输入到FPGA芯片中并在其中将该数据转换到RGB色域后在输出到ADV7123芯片进行D/A转换，最后经过VGA接口电路把处理过的图像呈现在显示屏上。经过相关的调试工作，系统通用性比较好，并且移动性能也不错。该系统的软件部分采用自顶向下的设计方法，模块化设计思想，硬件语言编程，只修改源程序，不必更改硬件电路，就可实现在线编程，实时控制，从而有效地减少系统的体积，不但增加了系统可靠性，降低研制成本，并且能够对控制逻辑进行修改升级，十分灵活。该系统包括三个功能模块：图像采集模块、图像处理模块、图像显示模块。关键词：FPGA；TVP5150；RGB色域；ADV7123芯片Image acquisition system based on FPGA design and implementationAbstractIt is the rapid development of science and technology, digital image processing technology has been rapid development in this era and has been widely used in all walks of life, and the maturity of FPGA technology has changed the commonly used parallel computer or digital signal processor (DSP), a special integrated circuit (ASIC) as the embedded processor usage. Programmable logic device (FPGA) with its low cost, high parallel processing speed, flexibility and short development cycle and other characteristics, has its unique advantages in image processing system. The project demand, this paper presents a solution of image acquisition and processing system based on FPGA, and the use of low cost and high performance of Altera companys CyclonelI series FPGA EP2C8Q208C8N as the core, design and development of integrated system of hardware and software of image acquisition and processing.In view of the reliability of video image acquisition and real-time performance, this paper describes how to FPGA for video acquisition system control. Using Cyclone Ⅱ EP2C8Q208C8NK chip produced by Altera company, is responsible for receiving and processing video data from the TVP5150 decoding, converts the data into RGB color gamut in the output to the ADV7123 chip. After debugging, the system better generality, and mobile performance is also good.Keywords： FPGA；TVP5150；RGB col