毕业设计（论文）-汽车自动线升降机车设计全套图纸）.docVIP

汽车自动线升降机车设计长春工业大学毕业设计摘要我国汽车工业快速发展，汽车生产线自动化程度随之增强。国外许多汽车公司相继进入中国的市场。在汽车生产线中，汽车生产流水线的主干是滑撬输送系统，高效率的汽车生产必然要求先进的生产线控制方式，随着汽车生产线自动化程度的提高，对组装，焊接生产线的输送效率有更高的要求。一些工件在各个工位要进行各个工序的操作，然而各个工位的高度并不都是在同一平面上，所以升降机车的的设计合理性直接影响到各个工序的顺利情况。本文主要说明了汽车自动线升降机车的设计，其中介绍了升降机车的设计原则，升降机车中的升降机构、传动和停止机构、传动原理以及PLC的设计方法及注意事项等。生产过程中所需要的时间大大减少，从而提高了生产效率。关健字：汽车自动线升降机车 停止机构 升降机构 全套图纸，加153893706Abstract The automobile industry develops quickly, and the automation degree of automobile production line is enhanced. Many foreign car companies have access to Chinas market. In the automobile production line, the backbone of auto production line is skid conveyor system, high efficiency of automobile production inevitable requirement of advanced production line control, with the improvement of the automobile production line, assembly, welding the transmission efficiency of the production line have higher requirements. Some artifacts in each station to each process of operation. However, the height of each station are not in the same plane, so the locomotive lifting the design rationality has direct effect to each process smoothly. This paper mainly describes the design of automobile automatic lifting line locomotive, which introduced the locomotive lifting design principles, locomotive lifting of the lifting mechanism, driving and stopping mechanism, transmission principle and PLC design method and matters needing attention. The time needed in the production is greatly reduced, which can improve the production efficiency.Keywords: Auto line lift locomotive Stop mechanism Lifting mechanism目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc421280862 1 绪论 PAGEREF _Toc421280862 \h 1 HYPERLINK \l _Toc421280863 1.1 汽车自动线升降机车的现状和发展趋势 PAGEREF _Toc421280863 \h 1 HYPERLINK \l _Toc421280864 1.2升降机车的主要研究内容 PAGEREF _Toc421280864 \h 1 HYPERLINK \l _Toc421280865 1.3 汽车自动线升降机车的结构与用途 PAGEREF _Toc421280865 \h 2 HYPERLINK \l _Toc421280866 1.3.1汽车自动线升降机车的结构 PAGEREF _Toc421280866 \h 2 HYPERLINK \l _Toc421280