外文文献翻译中英文基于LIN总线智能雨刮器.docVIP

外文文献翻译 (含：英文原文及中文译文) 文献出处：He H, Yang P, Zhang Z, et al. Design and Implementation intelligent car wiper based on LIN Bus[J]. Advanced Materials Research, 2012, 503-504:1194-1197.英文原文 Design and Implementation intelligent car wiper based on LIN BusHe H, Yang P, Zhang Z, et alAbstract: Contrary to the problem that the process of rainy car manual manipulation causes much interference to the driver, a design method for intelligent car wiper based on the LIN bus is proposed. It adopts the chips MC9S08DZ60 and MC33661 as the controller from Freescale that dedicated to the automotive electronics field. During its working, with the rain sensor sensing the magnitude of outside rainfall, it can automatically adjust the wiper speed, achieving the intelligent wiper control.Keywords: Rain wiper control, LIN bus, Intelligent, FreescaleIntroduction The number of wiring harnesses is increasing at the double speed by the growing in the quantity of automotive electronic components. The increasing of wiring harness occupies the interior effective space and enlarges the cost of vehicle. On the other hand, it impedes the improvement of vehicle reliability. LIN bus, as a low-cost serial bus technology meeting the requirements of car body electronics, can provide a low-cost and short-distance network connection for electric machines, switches, sensors and lights[1]. As an important part of the electronic automotive vehicle, car wiper plays a particularly important role in the rain and fog weather. At present, the automobile wiper control system in the market mainly adjusts wiper speed through manually. The manual adjustment will not only cause some interference to the driver's energy but also can not promptly respond to the sudden incident such as rain splashing on the windshield, increasing the accident probability. Therefore, it’s especially important to install the intelligent car wiper on the car body.Based on the above introduction, the text designs and implements an intelligent car