2009-10-西安会议技术交流-英文.ppt

Contents 1. Rheological Property of Carboxymethyl Fracturing Fluid 3. Application on Site and Test Oil Yield Optimization of Treatment Parameters Optimization of Fracture Parameters * * Lab Research and Oilfield Application of New Carboxymethyl Fracturing Fluid Jianfang Jiang Tel: 0861089733552 Mobile:E-mail: jjf8989@126.com Enhanced Oil Recovery Research Center, China University of Petroleum, Beijing October, 2009 About 8600 well-time fracturing treatments were carried out per year during ten years recently, and the increased oil output was 586×104t annually. Which means there is a medium oilfield, which has been keeping stable output for 10 years in Petrochina. Damages from residue and unbroken crosslinked fracturing fluid to fracture and matrix formation are key important factors, and influence on stimulation effect. It is research focus and aspect of fracturing technology to develop new fracturing fluid system and reduce damage. Based on the background, the new carboxymethyl Fracturing fluid was developed and applied. Preface 1. Rheological Property of Carboxymethyl Fracturing Fluid 2. Low Damage Property of Carboxymethyl Fracturing Fluid 3. Application and Good Test Oil Yield On Site 4. Opinion and Conclusion Basic Properties provoking 6.5 118.8 （0.6%dry basis ） 0.92 5.88 light yellow powder carboxymethy guar provoking 7.0 121.5 （0.6% dry basis ） 5.79 6.53 light yellow powder better hydroxypropyl guar crosslinking properties pH apparent viscosity mPa?s insoluble content in water % moisture content % appearance sample Insoluble content in water is very low；Weak acidic solution, which was ever difficult in crosslinking. Viscosity of Base Fluid 12.5 0.22 12.0 0.20 9.0 0.18 7.5 0.15 viscosity of base fluid mPa?s concentration of carboxymethyl thickener % 1. Rheological Property of Carboxymethyl Fracturing Fluid The concentration of carboxymethyl thickener and the viscosity of base fluid is very low.