基于三维软件的插座上盖模具设计计算说明书推荐.docVIP

基于三维软件的插座上盖模具设计 摘要：注射成型是材料成型的一部分，是塑料产品的成型中的一种及其重要的方法。注塑成型模具设计的好坏,决定着注塑成型制件的质量优劣及成品率高低,也就是说,是否能加工出优质价廉的塑料制件,在很大程度上要靠注塑成型模具设计的合理性和先进性来保证. 本设计通过塑料成型工艺，塑料模具设计的正确分析。在设计模具决定之前，应该综合考虑因素有，模板，前模，后模，后模块等。此外还有塑料成型件直接接触的型腔与型芯，在一定温度下熔化在高温和压力下，所以必须有一个合理的结构，强度和刚度，耐磨性和正确的几何形状，尺寸精度高，表面粗糙度低。并设置合理的塑件的工艺参数。 本设计是以上盖设计模型，结合相关的理论知识，设计一套理论上可以进行生产的上盖的模具。最后设计成果以一套CAD电子图档和设计说明书的形式呈现。 关键词：注塑、模具设计、型腔型芯 Design of socket upper cover mould based on three dimensional software Abstract：Injection molding is a kind of important method of plastic molding, it is mainly suitable for thermoplastic plastic molding, can be a complicated shape of precision plastic forming parts. This topic is to plastic as a design model, the injection mold of the related knowledge as the basis, elaborated the design of plastic injection mould process. Through the analysis of the right of plastic molding process, a pair of plastic mould design. Decided to die in a geometric shape and size of components called molding parts, including former template template, front mould kernel, back, back mould kernel, back mould set piece of design. Molding parts in direct contact with the plastic at work, at a certain temperature melt under high temperature and high pressure, so there must be a reasonable structure, high strength and rigidity, good wear resistance, the correct geometry, high dimensional accuracy and low surface roughness. Important parts of the process parameters selection and calculation, and extrusion outfit, inject system and other structures of the design process. Should be according to the characteristics of the plastic molding parts, the design, the structure of the plastic parts, and use requirements, determine the overall distribution of cavity, choose the parting surface, determine the demoulding way, design pouring system, overflowing system, etc., and then according to the requirement of the machining process and assembly process for the structural design of molding parts, calculating the forming parts work,