基于单片机二氧化碳红外检测仪设计论文.doc

基于单片机二氧化碳红外检测仪设计论文.doc

  1. 1、本文档共52页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
基于单片机二氧化碳红外检测仪设计论文

- PAGE III - 基于单片机的二氧化碳红外检测仪设计 摘要 随着社会经济的发展,人们生活水平普遍提高,瓜果、蔬菜及花卉的社会需求数量和品质要求也不断提高,特别是大中城市需要周年供应新鲜蔬菜,因此农业温室得到迅速发展。二氧化碳气体对农作物的生长起着非常重要的作用。近些年来,我国北方农村形成了以日光温室为主导的农业产业化,因此,为二氧化碳的增施创造了有利的条件。由于不同作物所需的二氧化碳浓度不同,在二氧化碳的增施中又难于控制对其量的排放,所以研制二氧化碳浓度检测器并用于日光温室的农业生产,对提高农业科技含量,促进农业增收,农民增收具有深远的意义。 本论文主要针对温室内二氧化碳浓度、温度以及湿度,设计了日光温室检测系统。综合考虑系统的精度、稳定性以及经济性要求这三个方面之后,确定以AT89S52单片机为控制核心,选用性价比比较高的传感器,来实现对二氧化碳浓度、温湿度的准确检测。针对不同的参数,可以通过键盘人为设定作物所期望的上、下限值。当单片机检测到二氧化碳浓度、温湿度有任何一个参数越限时,则启动声光报警,这时检测人员通过主机打开相应的执行机构进行补偿。检测器可以通过RS-232实现和温室主机的串行通讯。 本系统具有易于操作、运行可靠、便于扩充等特点。该系统考虑到温室环境的复杂性增加传感器实现多点多目标因子的检测。系统体积小,操作非常简单,灵活性强,针对不同环境、不同作物的不同要求,可以随时随地修改极限报警值,人机界面友好。该系统具有功能强成本低的特点,适合在各种温室或塑料大棚进行环境因子检测。 关键词:日光温室,二氧化碳浓度,温湿度,单片机,测控 Design of carbon dioxide infrared detector based on MCU Abstract As our country realizes the comparatively well-off level basically, people's living standards generally improve, especially the Large and medium cities need to supply the fresh vegetables in anniversary, This needs to develop production of the greenhouse Carbon dioxide on crop growth and plays a very important role. In recent years, the rural north China have formed a greenhouse-led industrialization of agriculture, therefore, applied for the increase of carbon dioxide created favorable conditions. Because different crops need different carbon dioxide concentrations, the growth in carbon dioxide it difficult to control its facilities in the amount of emissions, so carbon dioxide detector developed and used in greenhouse agriculture production, raise agricultural science and technology to promote agricultural income and farmers increase of far-reaching significance. This thesis presents the measuring and controlling system about temperature, humidity and carbon dioxide's density in the greenhouse, composed of host PC and secondary MCU. Considering the accuracy and economical, this thesis design AT89S52 as the core control apparatus, and choose the sensors with high ration between performance and cost. it achieved accurate mea

文档评论(0)

dajia1qi + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档