小型路面铣刨机设计论文.docVIP

PAGE II PAGE 1 摘 要 小型路面铣刨机是一种高效的沥青路面维修养护设备。 设计对路面铣刨机械的技术发展趋势和国内外市场前景做了简单介绍并分析，以此确定铣刨机初步的总体设计。 路面铣刨机主要工作装置是铣刨转子，对铣刀的排布和一些主要参数进行设计，使铣刨刀顺序接触路面，路面材料在铣刨转子刀具的冲击和挤压下破碎为颗粒状。路面铣刨机以工作速度向前移动，同时呈螺旋状对称排列的刀具将铣下的废料向转子中央聚集，通过抛料板将废料抛到输送机上，并转移到指定位置和运输车辆上。对铣刨机的传动系统进行设计，使铣刨机更加轻便、易操作。同时，对输料系统和行走系统进行了简单的设计。 关键词：铣刨机；轮式；输料装置；刀具 辽宁工程技术大学毕业设计（论文） Abstract Small road milling machine is a kind of efficient equipment repair and maintenance of asphalt pavement. Design of pavement milling machinery technology development trend and the domestic and foreign market prospects do the simple introduction and analysis, in order to determine the milling machine initially, the overall design. Road milling machine main work device is milling planing rotor, for milling cutter arrangement and some main parameters of design, make milling planer order contact with the road and pavement materials in the impact of milling planing rotor cutter and squeeze broken granular. Road milling machine to speed moving forward, and a helical symmetry arrangement tool will milling waste to the center of the rotor gathered by throwing plate waste thrown onto the conveyor and transferred to the specified location and transport vehicles. Design of transmission system of the milling machine, the milling machine is more convenient, easy to operate. At the same time, the simple design of the feeding system and the walking system is carried out. Keywords: milling planer ;planetary reducer ;track ;transporting machine ;tool PAGE III 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc11651 摘 要 PAGEREF _Toc11651 I HYPERLINK \l _Toc6059 Abstract PAGEREF _Toc6059 II HYPERLINK \l _Toc3468 目 录 PAGEREF _Toc3468 III HYPERLINK \l _Toc8336 1 绪论 PAGEREF _Toc8336 1 HYPERLINK \l _Toc5249 1.1 路面铣刨机及其发展概况 PAGEREF _Toc5249 1 HYPERLINK \l _Toc20707 1.1.1路面铣刨机的分类 PAGEREF _Toc20707 1 HYPERLINK \l _Toc13709 1.1.2 路面铣刨机的应用特点 PAGEREF _Toc13709 2 HYPERLINK \l _Toc21203 1.1.3 国内外路面铣刨机发展概况 PAGEREF _Toc21203 2 HYPERLINK \l _Toc387