GT1-4型钢筋调直切断机的设计【毕业论文+CAD图纸全套】.doc

买文档就送您CAD图纸，Q号交流197216396 PAGE \* MERGEFORMAT I 摘 要 GT1-4型调直切断机用于调直和切断直径1-4mm钢筋，可广泛用于五金制品、工艺品及日用品生产的各个领域。该机器由进线部分、调直部分、切断部分等组成，可设定钢筋切断长度并自动落料。 本文对钢筋调直切断机的设计进行了比较系统的研究，对钢筋调直切断机进行了分类和综合的介绍；对钢筋调直切断机的工作原理进行了系统的分析；对钢筋调直切断机的功率计算与分配、受力分析、结构设计、主要零部件设计与选择等进行了详细的介绍。对产品总体结构和工作性能进行了优化设计，达到了比较完善的设计要求，最后对钢筋调直切断机进行了总体调试。 本次设计的钢筋调直切断机为电机驱动钢筋调直切断机，用于调直直径为1-4mm的盘圆钢筋或冷拔钢筋。并且根据需要长度进行自动调直和切断，调直过程中将钢筋表面氧化皮、铁锈和污物除掉。充分发挥了其良好的机动性，体积小，操作简单，效率高等特点，在提高施工速度，保证施工质量的同时，降低了人工与材料的成本，减轻了劳动强度，提高了劳动生产率。 关键词：钢筋；调直；切断；设计 Abstract GT1-4 type straightening cutting machine for straightening and cutting diameter of 1-4mm steel can be widely used in various fields of hardware products, crafts and daily necessities production. The machine is composed of straight line part, part cut part, set steel cutting length and automatic blanking. The tune for a reinforced straight cutting machine design of systematic research, of reinforced straight cutting machine were classified and comprehensive presentation; of reinforced straight cutting machine principle of work analysis system; of reinforced straight cutting machine power calculation and allocation, force analysis, structure design, design of the main parts and the selection etc. were introduced in detail. The overall product structure and properties of the optimal design, meet the requirements of the design more perfect, at the end of the steel bar straightening and cutting machine for the overall debugging. The design of reinforced straight cutting machine for motor drive reinforced straight cutting machine for straightening diameter for 1-4 of coiled steel or cold drawn bar. And according to the required length of automatic straightening and cutting, straightening process will be reinforced surface oxide skin, remove rust and dirt. Give full play to its good maneuverability, small size, simple operation, high efficiency, in improving the speed of construction to ensure construction quality, reducing the cost of labor and materials, reduce the labor