ST单芯片触摸屏幕解决方案FingerTip.pdf

ST FingerTip 多点触控解决方案 1，FingerTip 5 英寸多点电容触控解决方案，支持 On-Cell 屏 The STMT05E device represents a marked improvement over competing technologies by providing an optimal mix of low power, small size, feature flexibility with unmatched true multi-touch performance in a single-chip touchscreen controller. The FingerTip STMT05E uses a unique capacitance to voltage conversion acquisition engine to implement the S-Touch capacitive sensing method. Coupled with the flexibility offered by the internal processor engine, the entire touchscreen sensing solution can measure, classify and track a single finger touch with fast report rate and response times on 240 nodes. Built-in movement tracking engine tracks greater than 10 independent touch movements. The acquisition engine uses an optimal measurement approach to ensure almost complete immunity from parasitic capacitance on the receiver inputs (sense lines). The engine includes sufficient dynamic range to cope with touchscreens of different size and configuration. This offers great flexibility to use with multiple touchscreens with different ITO designs and overlay materials. One and two layer ITO sensors are possible using glass or PET substrates. The STMT05Es capacitive analog front-end provides enhanced noise suppression capabilities for various noise sources such as display, human body captured noise, system generated noise and severe common mode noise introduced by battery chargers. ST’s advanced capacitive sensing technology coupled with a powerful digital 32-bit DSP engine is able to address common mode noise to provide high level of noise immunity without reducing the overall touch performance in terms of response time, frame rate and power consumption. The device has an external SYNC pin for LCD noise filtering for an on-cell display touchscreen technology. The synchronization of the signal acquisition with the LCD SYNC signal helps in removal