基于MALAB的脉冲编码仿真设计毕业论文.docVIP

PAGE PAGE 4 毕业设计（论文）说明书 院（系）：通信与控制工程学院 专 业：通信工程 姓 名： 题 目：基于MATLAB的脉冲编码仿真 日期： 2004年 6月 3日 摘 要：本课题结合MATLAB软件的Simulink仿真功能与S-函数的仿真扩展功能，完成了对脉冲编码调制（PCM）系统的仿真与建模分析。课题中主要分为三部分对脉冲编码调制（PCM）系统原理进行仿真建模与仿真分析，它们分别为采样、量化和编码原理的仿真建模。同时仿真分析了采样与欠采样的波形、均匀量化与非均匀量化的量化误差、A律13折线和μ律15折线的量化误差、PCM与DPCM系统的量化噪声。通过对脉冲编码调制（PCM）系统原理的这些仿真分析，在教学中将会有很大的应用价值。 关 键 词：脉冲编码调制（PCM）；Simulink仿真；量化误差 Abstract: In this task, combination the Simulink emulatation function and the S- function’s spread function of MATLAB software, have completed the systematic emulatation and modeling for pulse code modulation( PCM). In this task，divide into 3 parts mainly, emulate to build mould and emulate analysis for the principle of pulse code modulation( PCM) systematic. They are modeling and emulatation of sampling, quantizing and ecoding. At the same time, emulate to analyse the waveform of sampling and owe sampling , the quantizing error of uniform quantizing and nonuniform quantizing, the quantizing error of A-Law and μ- Law , the quantizing noise of PCM and DPCM system. Through the emulatation’s analysing for these pulse code modulation( PCM) of systematic principle, it will have a great value of application for teaching in the future. Keywords: Pulse coding modulation ( PCM); Simulink emulates ;Quantizing error 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _To第一章 项目概述 PAGEREF _To\h 1 HYPERLINK \l _To第二章 MATLAB简介 PAGEREF _To\h 2 HYPERLINK \l _To2.1 MATLAB与通信仿真 PAGEREF _To\h 2 HYPERLINK \l _To2.1.1 MATLAB的概述 PAGEREF _To\h 2 HYPERLINK \l _To2.1.2 MATLAB集成开发环境 PAGEREF _To\h 2 HYPERLINK \l _To2.1.3 通信仿真 PAGEREF _To\h 2 HYPERLINK \l _To2.2 Simulink仿真系统 PAGEREF _To\h 4 HYPERLINK \l _To2.2.1 Simulink的简介 PAGEREF _To\h 4 HYPERLINK \l _To2.2.2 Simulink的工作环