称重传感器四角标五柱式液压驱动加载机设计.docVIP

ee 毕业论文(设计) 题 目 称重传感器四角标定五柱式液压驱动加载机设计 学生姓名 ee 学号 ee 所在院(系) 机械工程学院 专业班级 ee 指导教师 ee 2010 年 6  称重传感器四角标定五柱式液压驱动加载机设计 ee （ee） 指导教师：ee 【摘要】：一般称重传感器，在出厂前必须进行四角误差标定。中航电测仪器股份有限公司生产的系列称重传感器，在出厂前必须进行四角误差标定，目前工厂采用手动方式加载载荷，工人强度大，生产效率低下，误差标定精度不高，拟针 对L6F系列传感器的四角误差标定问题，设计一台自动加载机，实现标定的自动化作业,用来减轻工人的劳动强度和提高生产效率，以及提高精度，手动加载往往被量程所限制，液压加载机可以有大量程和大的负荷，很好提高作业效率，这自动加载机对工业自动化，为称重传感器四角偏载修正提供可靠的数据依据，从而提高产品质量，提升产品可靠性，最终提升产品的核心竞争力。 【关键词】：自动加载 四角标定 称重传感器 The corners of the weighing sensor calibration five pillar type hydraulic loading machine design ee （ee） Tutor: ee 【 abstract 】 : general weighing sensor, the four error calibration must be conducted before they go out.In avionics test equipment co., LTD., the production of series of weighing sensor, error calibration, four corners must be conducted before they go out in the mills use manually load load, large intensity of workers, production efficiency is low, the error calibration accuracy is not high, proposed four series for L6F sensor error calibration problem, design a automatic loading machine, to realize the automatic calibration of the homework, is used to reduce the labor intensity of workers and improve the production efficiency, and improve the precision of manual loading is often limited by range, hydraulic loading machine can have large span and large load, is very good to improve the working efficiency, the automatic loading machine for industrial automation, the four partial load correction for weighing sensor to provide reliable data basis, to improve the quality of products, improve product reliability, eventually to promote the core competitiveness of the product.【 key words 】 : automatically load the four calibration weighing sensor 目 录 1. 绪论 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc390345572 1.1称重传感器四角标定修正作用及目前现状 PAGEREF _Toc39034