三河尖矿1.2 Mta新井设计说明书 采矿工程专业（毕业论文） 毕业设计.doc

中国矿业大学2009届本科生毕业设计 摘 要 本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为三河尖矿1.2 Mt/a新井设计。三河尖煤矿位于江苏省徐州市北面，交通便利。井田走向（东西）长约4.31 km，倾向（南北）长约3.75 km，井田总面积为15.69 km2。主采煤层为7号煤、9号煤，平均倾角为13°，煤层平均总厚为6.0 m。井田地质条件较为简单。 井田工业储量为12555万t，矿井可采储量9003万t。矿井服务年限为53.6 a，涌水量不大，矿井正常涌水量为60 m3/h，最大涌水量为120 m3/h。矿井绝对瓦斯涌出量为10 m3/min，相对瓦斯涌出量为3.024 m3/t，为低瓦斯矿井。 井田为立井单水平开拓。大巷采用胶带运输机运煤，辅助运输采用矿车。矿井通风方式为中央并列式通风。 矿井年工作日为330 d，工作制度为“四六”制。 一般部分共包括10章：1.矿区概述及井田地质特征；2.井田境界和储量；3.矿井工作制度及设计生产能力、服务年限；4.井田开拓；5.准备方式-采区巷道布置；6.采煤方法；7.井下运输；8.矿井提升；9.矿井通风与安全；10.矿井基本技术经济指标。 专题部分题目是综合指数法在矿井冲击危险性评价中的应用。通过建立冲击矿压危险性评价模型，应用综合指数法对冲击矿压的危险性进行评价与预测。 翻译部分所译的文章为：Study on fault induced rock bursts，主要讲述了当工作面向断层推进时，由于滑移扰动而诱发的冲击矿压。 关键词：矿井设计，立井开拓，冲击矿压，断层  ABSTRACT This design includes of three parts: the general part, special subject part and translated part. As the general part of the paper, a new design of Sanhejian mine has been completed. Sanhejian mine is situated in North of Xuzhou city of Jiangsu province. The traffic of road and railway is very convenience to the mine. The run of the minefield is 4.31 km ,the width is about 3.75 km，well farmland total area is 15.69 km2.The seven and nine are the main coal seam, and the dip angles are 13 degree. The thickness of the mine is about 6.0m in all and the geology of the coalfield is simple. The industrial reserves of the minefield are 125.55 million tons and the recoverable reserves are 90.03 million tons. The designed throughput of coal is 1.2 million tons per year, and the service life of the mine is 53.6 years. The normal flow of the mine is 60 m3 per hour and the max flow is 120 m3 per hour. The absolute outflow of gas is 10 m3/min and the relative gas emissions 3.042 m3/t as a low Sanhejian mine is developed by vertical shaft with a single level. In main haulage way, the coal is transported by HYPERLINK /dict_result.aspx?searchword=%e7%9a%ae%e5%b8%a6%e8%bf%90%e8%be%93%e6%9c%batjType=sentencet=belt+conveyerbelt conveyer, and the mine car is auxiliary transportation in main rail-tunnel. The