基于Labview的图像测量分析系统设计-毕业设计.doc

华南理工大学广州学院本科毕业设计（论文）说明书 本科毕业设计（论文）说明书 基于LabVIEW的图像测量分析系统设计 学 院 专业班级 学生姓名 学生学号 指导教师 提交日期 PAGE II PAGE I 摘 要 机器视觉作为多学科的交叉领域，有着越来越广泛的应用，虚拟仪器能够很好的满足视觉系统的实时性和精度要求，二者结合具有突出的实用性，基于虚拟仪器的机器视觉系统具有必要性和可行性，同时也降低硬件设备成本且具有高精度，非接触，以及高自动化的特点。接下来本文介绍了虚拟仪器的软件开发平台LabVIEW(Laboratory Virtual Instrument Engineering Workbench)以及LabVIEVV视觉软件模块IMAQ Vision(Image Acquisition System Vision)，并在此基础上开发了目标图像测量分析系统。 按照机器视觉系统的逻辑结构，图像分析系统是机器视觉的重要组成成分，本文接着探讨了目标图像采集后的预处理过程及图像分割技术和方法，在此基础上探讨了本文机器视觉系统图像测量分析系统的设计方法，基于模块化的编程思路，最后实现了“基于LabVIEW的图像测量分析系统设计”的设计，包括系统软件的设计，仿真的制作，以便能为以后机器视觉系统的开发借鉴，最终完成的系统具有扩展性，可靠性和精确性好等特点。 关键词:机器视觉；虚拟仪器；LabVIEW；IMAQ Vision；测量分析 ABSTRACT As a multidisciplinary cross field, Machine Vision has been applied more and more widely. Virtual instruments can well fulfill the requirement of real time and precision whose combination possesses an outstanding practicability. Machine Vision System which is based on the virtual instruments is necessary and feasible; at the same time, it reduces the hardware device costs. Whats more, Machine Vision System is featured with high precision, high automation and non-contact. This paper introduces the common development platform of virtual instruments LabVIEW and its visual software module IMAQ Vision (Image Acquisition System Vision). Based on that, developing the Target Image Acquisition System Based on the logical structure of image measurement and analysis system, the Target Image Acquisition System is an important part of machine vision. Then this paper discusses the preprocessing procedure after the acquisition of image, as well as the technology and methods of image segmentation, which is the base for the design methods of Machine System and Target.Image Acquisition System in this paper.And with the Modular programming ideas, I finally accomplish the design of image measurement and ana