Determination of Fracture Toughness of Anisotropic各向异性断裂韧度的测定 岩石的边界元法.pdfVIP

Rock Mech. Rock Engng. (2008) 41 (4), 509–538 DOI 10.1007/s00603-005-0089-9 Printed in The Netherlands Determination of Fracture Toughness of Anisotropic Rocks by Boundary Element Method By C.-C. Ke, C.-S. Chen, and C.-H. Tu Department of Resources Engineering, National Cheng Kung University, Tainan, Taiwan Received April 15, 2005; accepted December 26, 2005 Published online April 28, 2006 # Springer-Verlag 2006 Summary This paper presents a systematic procedure for determining fracture toughness of an anisotropic marble using the diametral compression test (Brazilian test) with a central crack on the discs. Additionally, a novel formulation to increase the accuracy in Stress Intensity Factor (SIF) calcula- tions using Boundary Element Method (BEM) is applied to determine the stress intensity factors and the fracture toughness of anisotropic rocks under mixed-mode loading. The numerical results show that the SIFs for both isotropic and anisotropic problems are in good agreement with those reported by previous authors. The marble with clear white-black foliation from Hualien (in eastern Taiwan), was selected for the Brazilian tests. Diametral loading was conducted on the Cracked Straight Through Brazilian Disc (CSTBD) specimens to evaluate their fracture toughness. In addition, a new fracture criterion was developed to predict pure mode I, pure mode II or mixed mode (I–II) fracture toughness of the anisotropic marble. The new fracture criterion is based on the examination of mode I, mode II and mixed mode (I–II) fracture toughness for different crack angles and anisotropic orientation. Keywords: Fracture toughness, anisotropic marble, Brazilian test, Stress Inten