Tpresso泡茶机英文说明书.docVIP

 TRESSO PHILOSOPHYZENITH TEA MakerUser’s manual TRESSO PHILOSOPHY ZENITH TEA Maker User’s manual PAGE 12 ？？？？？ZENITH TEA Maker ？？？？？ ZENITH TEA Maker User’s manual Using the tea maker for the first time P.6 Daily use P.6 Functions P.9 Button list P.9 Tea maker diagram P.10 LED list P.11 Buoy tips P.11 Water tank position P.12 Tea maker status indication P.13 Problems and solutions P.14 Why you are different from others P.15 Operation instructions P.17 Unpack installation P.17 Tea maker placement P.17 Technical data P.17 Safety instructions P.18 Using the tea maker for the first time P.18 Tea maker startup procedure P.18 Daily use P.19 Cup size setting P.19 Sleep P.20 Auto close P.20 Factory cup size setting P.20 Maintenance cleaning P.21 Scale removal P.21 Maintenance P.22 Operation instructions of ellipse water tank P.23 Oblong water tank P.24 Grip operating instructions P.25 Cluster operating instructions P.26 Bliss operating instructions P.27 Using the tea maker for the first time 1. Connect the water tank to the tea maker. 2. Add water into the water tank. 3. Plug in the tea maker. 4. Turn the power on, the blue power switch lights up. ZENITH TEA Maker 5. Heating stage: Heat for 3-5 minutes, the LED flickers. 6. Heating completed: The heating LED stops flickering, “Small cup”, “Regular cup” and “Large cup” LEDs light at the same time. 7. Startup procedure: Open the handle and put an empty grip into it. 8. The handle is under the open state. Using the tea maker for the first time 9. Pull out the steam stem. 10. Place a container below the steam stem and turn the steam switch rightward. 11. Press the “Large cup” button 12. The pre-watering process starts up before water flows in, it will stop automatically in 4 seconds. ZENITH TEA Maker 13. When water flow is smooth, close the steam stem and put a container under the grip. 14. Press the “Large cup” button again, the operation is completed. 15. Push the steam stem back to its original