太阳能结晶炉总装生产线平衡研究.docVIP

PAGE 中国最大的论文知识平台 内 容 摘 要 随着社会生产的发展，现代工业生产中不可避免地出现了高度的重复性，装配线生产便营运而生。事实证明，装配线生产方式是适应大批量生产及管理的有效手段，已经受到越来越多人的关注。工业装配线上的不平衡程度不仅直接反应了装配线的生产效率，而且影响到产品的质量。本文以绍兴县精工机电研究所有限公司太阳能结晶炉总装生产线为研究对象，在总结和分析现有相关文献的基础上，通过对现有装配线进行实地考察以及相关数据的测量，使用速度图表分析其平衡状况，根据ECRS原则，改善节拍，包括对原有工序进行拆分、重组，以达到消除瓶颈现象的目的。新方案实施后该总装生产线的平衡率从原有的31.48%提高为49.74%。 关键词：生产线平衡、生产线平衡率、流程、工序、节拍 ABSTRACT With the development of the social manufacture, the intense repetition has been appeared inevitably in the modern industry; accordingly the assembly line comes into being. It has been proved that the operative mold of assembly line is an effective way which is suitable for massive production and management, and it has been attracted more and more social concern. The imbalance of the industrial assembly line not only reflects its efficiency but also influences the quality of products. This paper focuses on the general assembly line of solar energy rime of ShaoXing JingGong of Electromechaincal Research institute Co. Ltd, based on summarizing and analysizing some references, through researching the present assembly line autoptical and measuring the relevant data, analysizing its balance state by using the diagram of speed, according ECRS and active economic rules, improving time , including splitting and regrouping its intrinsic working procedure, so as to eliminate the bottle-neck phenomenon. After implementing the new project, the balance rate of assembly line will increase to 31.48% from intrinsic 49.74%. KEYWORDS：the balance of assembly line， balancing rate ，process，route， cycle time 正文目录 TOC \o 1-2 \h \z \u HYPERLINK \l _Toc 第一章 绪论 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 第一节 引言 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 第二节 课题研究的背景和意义 PAGEREF _Toc \h 2 HYPERLINK \l _Toc 第二章 装配生产线平衡问题概述 PAGEREF _Toc \h 4 HYPERLINK \l _Toc 第一节 装配生产线的发展历程 PAGEREF _Toc \h 4 HYPERLINK \l _Toc 第二节 装配线的特点及优势 PAGEREF _Toc \h 5 HYPERLINK \l _Toc 第三节 生产线平衡分析法 PAGEREF _Toc \h 6 HYPERLINK \l _Toc 第四节 装配线平衡改善的原则及方法 PAGEREF _Toc