麻花钻刃磨位姿与刃磨参数研究.docVIP

ee 麻花钻刃磨位姿及刃磨参数研究 作者：ee 所在单位：（ee） 指导老师：ee [摘要]该项成果对金属切削刀具麻花钻中应用最广的锥面麻花钻的数学模型进行了全面、系统和深入的研究，提出了用尾隙角作为补充几何参数，从理论和实践上解决了锥面麻花钻几何形状的正确描述和确定后刀面几何形状时的唯一性问题所建立的直线主刃与曲线主刃的统一数学模型具有一定的创新该研究对麻花钻钻尖几何形状及刃磨质量的精确控制、钻尖刃磨机床的设计及机床钻削机理的研究、钻头ＣＡＤ与PRO /E的研究等均有着重要的理论和实际意义，在国内处于领先地位。  [关键词] 刃磨 切削面 麻花钻 数学模型 三维模型  Manual Twist Drill Gang Pose and Cutting Parameters Author: ee Unit：ee) Tutor: ee [HYPERLINK app:ds:abstractabstract]The results to metal cutting tool manual twist drill the most widely applied in the cone manual twist drill mathematical model for a comprehensive system and in-depth research, this paper presents a tail gap Angle as a supplement geometric parameter, from theory and practice on the surface manual twist drill to solve the geometry of the correct description and determine the knife surface geometry shape after the uniqueness problems of a straight blade and the curve of the blade mathematical model has unified certain innovation of the manual twist drill drill geometry and gear pointed precise control of the quality of the machine tool, cutting drill tip design and machine tool drilling mechanism of CAD and drill PRO/E study all has the important theoretical and practical significance, and is in the leading position. [HYPERLINK app:ds:keywordkeyword]Gang, block, manual twist drill, mathematical model, 3 d model  目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc16258 引言 PAGEREF _Toc16258 1 HYPERLINK \l _Toc29661 1、麻花钻几何形态 PAGEREF _Toc29661 2 HYPERLINK \l _Toc10630 1.1研究麻花钻结构参数 PAGEREF _Toc10630 2 HYPERLINK \l _Toc1417 1.2标准麻花钻的组成 PAGEREF _Toc1417 3 HYPERLINK \l _Toc23290 1.3标准麻花钻切削部分的组成 PAGEREF _Toc23290 4 HYPERLINK \l _Toc15599 1.4麻花钻的结构参数 PAGEREF _Toc15599 4 HYPERLINK \l _Toc21543 1.4.1尺寸参数 PAGEREF _Toc21543 4 HYPERLINK \l _Toc27496 1.4.2角度参