基于单片机的万年历与温度检测报警系统的程序.docVIP

#includereg52.h #includemath.h #includeINTRINS.H #define uchar unsigned char #define uint unsigned int //各个IO口的初始化 sbit dscs=P2^0;sbit dsas=P2^1;sbit dsrw=P2^2;sbit dsds=P2^3;sbit irq=P3^2; sbit s1=P3^0;sbit s2=P3^1;sbit s3=P3^2;sbit s4=P3^3;sbit beep=P1^0; sbit beep1=P1^1;sbit rs=P2^4;sbit rw=P2^5;sbit e=P2^6;sbit DQ=P1^7; int i,tt=0; uchar table0[]={WELCOME !}; uchar table1[]={HAVE A NICE DAY!}; uchar table2[]={SET ALARM}; int miao,fen,shi,nian,yue,ri,week,s1num=0,num=0, num2=1,flag,flag_di,flag1,amiao,afen,ashi; uchar flag_get,num1,TZ=0;TX=0;keyxuan=1; uchar baiwei,shiwei,gewei,shifen,baifen,qianfen,wanfen; uint wd; void write_temperture(uchar TZ,uchar TX); void ReadTemperature(); void DS18B20(); unsigned char ReadOneChar(); void WriteOneChar(unsigned char dat); void ddelay(unsigned int i); void dididi(); void delay(uint z){ uint x,y;for(x=z;x0;x--)for(y=110;y0;y--);} //液晶写数据与命令函数 void write_com(uchar com) {rs=0;rw=0;e=0;P0=com;delay(5);e=1;delay(5);e=0;} void write_date(uchar date) {rs=1;rw=0;e=0;P0=date;delay(5);e=1;delay(5);e=0;} void init(){ rw=0;write_com(0x38);write_com(0x0c);write_com(0x06);write_com(0x01); write_com(0x80);EA=1;EX0=1;IT0=1;TMOD=0x01;TH0=(65536-50000)/256; TL0=(65536-50000)%256;ET0=1;TR0=1;flag1=0;flag=0;flag_di=1;} DS12C887//读写数据与地址命令 void write_ds(uchar add,uchar date){ dscs=0;dsas=1;dsds=1;dsrw=1;P0=add;dsas=0;dsrw=0; P0=date;dsrw=1;dsas=1;dscs=1;} uchar read_ds(uchar add) {uchar ds_date;dsas=1;dsds=1;dsrw=1;dscs=0;P0=add;dsas=0;dsds=0;P0=0xff; ds_date=P0;dsds=1;dsas=1;dscs=1;return ds_date; } void write_sfm(uchar add,uchar date)显示时分秒函数 {uchar shi,ge;shi=date/10;ge=date%10;write_com(0x80+0x40+add);write_date(0x30+shi); write_date(0x30+ge);} void write_nyr(uchar add,uchar date)显示年月日函数 {uchar shi,ge;shi=date/10;ge=date%10;write_com(0x80+add); write_date(0x30+shi);write_date(0x30+ge);} void didi()//闹钟报警程序 {beep=0;delay(100);beep=1;delay(100);beep=0;delay(100);beep=1;} void dididi()//温度报警程序 {beep1=0;delay(150);beep1=1;delay(150);beep1=0;d