替代现有过压过流分立器件保护方案TVSfuse.PPT

TE 优势电路保护产品 TE电路保护市场30年 1980年，业界首家创新式地成功使用聚合物正温度系数材料（PPTC）作为可恢复过流保护器件于电子电路中。 帮助许许多多电子设备制造厂商，使其设备更加安全、可靠。 致力于创新标准的应用，广泛地提供客户定制型电路保护解决方案。 过流保护 PolySwitch? 自恢复保护器件 表面贴式保险丝 过压保护 ESD 保护器件 陶瓷气体放电管 综合保护 2Pro? 器件 PolyZen? 器件 PPTC技术及PolySwitch元件 PPTC PPTC (Polymer Positive Temperature Coefficient 高分子正温度系数) PPTC元件 (高分子正温度系数热敏元件) PolySwitch元件 一种高品质的PPTC元件 过流/过热保护元件 可多次使用 PolySwitch典型工作电路 用途及用法 过流保护(短路保护，过载保护)；与被保护部分串联 过热保护；与易过热器件热连接 优势 内阻小且稳定性好 纯电阻(10MHz以下) 动作速度快 表面温度低 Design case : LED Lighting Part Numbers: LVR016 Functional Area: LED short protection LEDs can fail short caused by improper connection. Protection Type: over current protection Working conditions: 240VAC, 80mA(60°C) A LED rating is 3V. The LEDs will be connected 48pcs in series. It means DC144V, Fault conditions: voltage, 240VAC, 3A(60°C) GDT气体放电管系列GDT for lightning protection Ceramic GDTs 2 and 3 Pole Devices Lead Types: No Lead, Radial Lead, Axial lead, T Lead Diameter Sizes: 6mm, 7.5mm, 8mm DC Sparkover Voltage Values: 90V - 3200V 8x20μs Surge Current Rating (10 times) : 5kA, 10kA, 20kA Fail-short Device Available Available on top and bottom of device Packaging Trays (Bulk special request) 雷击保护要求- IEC61000-4-5（GB/T 17626.5） TE AC 2 Pro Loss of neutral protection TE AC 2 Pro Loss of neutral protection Loss of neutral abnormal Standard unprotected MOVS are typically rated to 275Vac RMS for a universal input voltage range The worst case would be a voltage of 400V instead of 230V derived from loss of neutral In a loss of neutral condition they may overheat with disastrous even if a fuse or power resistor is used in upstream The 2Pro device’s PPTC element helps prevent thermal runaway, maintaining varistor surface temperature at less than 150 degree TE AC 2Pro Lead Spacing Considering that PPTC is located in the primary side for LVM2P, a minimum distance between leads of 5.08 mm is required to meet the safety clearance. TE AC 2Pro Summary Meet IEC61000-4-5 Lightning based on IE