设备、材料采购、运输、保管与施工防腐管理程序.pdf

PGRP IPMT ANTICORROSION MANAGEMENT PROCEDURE FOR PROCUMENT,TRANSPORTATION,, STORAGE CONSTRUCTION OF EQUIPMENT MATERIALS 设备、材料采购、运输、保管及施工防腐管理程序 TABLE OF CONTENTS 目录 1.0 目的 PURPOSE 2.0 采购、运输的防腐管理 ANTICORROSION MANAGEMENT FOR PROCUREMENT TRANSPORTATION 3.0 进厂、存储、施工的防腐管理 ANTICORROSION MANAGEMENT FOR INCOMING PLANT, STORAGE AND CONSTRUCTION 4.0 施工完成至水压试验后的保护 PROTECTION AFTER COMPLETING CONSTRUCTION AND HYDROSTATIC TESTING 5.0 考核办法 ASSESS MEASURE 6.0 遵循的相关文件 RELEVANT SPECIFICATIONS TO BE FOLLOWED PGRP1-GEN-PRO-0161 Rev A00 Page 2 of 9 20-Aug-2008 PGRP IPMT ANTICORROSION MANAGEMENT PROCEDURE FOR PROCUMENT,TRANSPORTATION,, STORAGE CONSTRUCTION OF EQUIPMENT MATERIALS 设备、材料采购、运输、保管及施工防腐管理程序 1.0 目的 PURPOSE 为了保证设备、材料在采购、运输、保管及施工的各环节中免受腐蚀破坏，强化管理，特 制定本文件。 In order to prevent corrosion damage on equipment and materials during procurement, transportation and construction etc., and strengthen management, the provision below shall strictly be followed. 2.0 采购、运输的防腐管理 ANTICORROSION MANAGEMENT FOR PROCUREMENT TRANSPORTATION 2.1 责任 RESPONSIBILITY 设计院应遵循本程序文件 6.0 “相关文件”的要求，在设计图和相关的设计文件中明确 设备、材料的防腐细则，充分考虑当地的潮湿、盐雾环境以及制造、运输、存放、安 装周期，标明包装、油漆等具体规定及其所依照的相关标准，细化设备外表面、密封 面、地脚螺栓等部位的防护方法与要求。 Design institutes shall keep to requirements given in 6.0 Relevant Specification to Be Followed of this IPM Procedure Document. Anticorrosion details of equipent materials shall be indicated in design drawings and relavent documents, and also local humidity,