传动轴的（毕业论文）.doc

德州科技职业学院毕业论文 英文摘要 PAGE PAGE I 德州科技职业学院 毕业设计（论文） 题目 院系名称 班 级 学生姓名 学 号 指导教师 答辩教师 时 间 摘 要 通过在校期间对传动轴的学习和认识对传动轴进行一下系统的分析和设计，支承传动件的零件称为轴。轴类零件毕业设计是机械工程类专业学生完成本专业教学计划的最后一个极为重要的实践性教学环节，是使学生综合运用所学过的基本理论、基本知识与基本技能去解决专业范围内的工程技术问题而进行的一次基本训练。这对学生即将从事的相关技术工作和未来事业的开拓都具有一定意义 传动轴是组成机器零件的主要零件之，一切做回转运动的传动零件（例如：齿轮，蜗轮等）都必须安装在传动轴上才能进行运动及动力的传动，传动轴常用于变速箱与驱动桥之间的连接。这种轴一般较长，且转速高，只能承受扭矩而不承受弯矩。应该使传动轴具有足够的刚度和高临界转速，在强度计算中，由于所取的安全系数较大，从而使轴的尺寸过大，本文讨论的传动轴工艺设计方法，并根据现行规范增添了些表面处理的方式比如表面发兰。 关键词：传动轴，零件，刚度，强度，表面发兰 德州科技职业学院毕业论文 Abstract PAGE 13 ABSTRACT Through the study of shaft during school and transmission of the system are analyzed and design. Supporting transmission parts called shaft. Axial parts of graduation design is mechanical engineering specialty students complete the teaching plan last a very important practical teaching link is to make the students comprehensive use of basic theory, we learned the basic knowledge and skills to solve major problems within the scope of the engineering technology and a basic training. The student is engaged in technical work related to the development and future career has certain Shaft is composed of the main parts of the machine parts, all of the transmission parts motion (for example: gear, gear, etc.) must be installed in the transmission of power to exercise and shaft transmission, often used in the connection between the transmission and drive. The shaft generally is long, and the high speed, can withstand torque not inherit the moment. Should make the shaft has enough rigidity and high speed, strength calculation, because of the large safety factor, thus make shaft dimension, this paper discusses the transmission technolo