nozzlestandad喷嘴相关标准.docVIP

编号 中文名称 英文名称 GB 18145-2003 HYPERLINK 陶瓷片密封水嘴 Ceramic cartridge faucets GB/T 8375-1987 HYPERLINK 水嘴分类、型号命名方法 Classification and type nomenclature for taps ANSI/ASAE S436.1-1997 装有喷雾器和喷嘴的中心旋转轴、弯头旋转轴和横向移动的灌溉机喷水均匀性测定试验程序 Test Procedure for Determining the Uniformity of Water Distribution of Center Pivot, Corner Pivot, and Moving Lateral Irrigation Machines Equipped with Spray or Sprinkler Nozzles ANSI/ASME MFC-3M-1-2004 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第1部分:总则 Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 1-General ANSI/ASME MFC-3M-2-2004 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第2部分:孔板 Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 2-Orifice Plates ANSI/ASME MFC-3M-3-2004 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第3部分:喷嘴和文杜利喷嘴 Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 3 - Nozzles and Venturi Nozzles ANSI/ASME MFC-3M-4-2004 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第4部分:文杜利流量计 Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi - Part 4 - Venturi Meters ANSI/ASME MFC-7M-1987 利用临界文氏流量喷嘴测量气体流量 Gas Flow by Means of Critical Flow Venturi Nozzles, Measurement of ANSI/ASTM F1601-2001 中央真空吸尘系统家用电动管嘴马达寿命评估试验方法 Test Method for Motor Life Evaluation of a Household Electric Motorized Nozzle for Central Vacuum Cleaning System ANSI/ASTM F1692-2001 家庭中央真空吸尘系统涡轮动力喷嘴寿命评估试验方法 Test Method for Life Evaluation of aTurbine Powered Nozzle for Household Central Vacuum Cleaning Systems ANSI/AWS C4.5M-2006 氧化燃料喷嘴的统一命名系统 Uniform Designation System for Oxyfuel Nozzles ANSI/AWWA C708-2005 多喷嘴式冷水表 Cold-Water Meters - Multijet Type ANSI/HI 9.6.2-2001 离心泵和立式泵.最大喷嘴负荷 Centrifugal and Vertical Pumps for Allowable Nozzle Loads ANSI/NFPA 1962-2003 消防水龙带包括接头和喷嘴的保养、使用和维修试验 Care, Use, and Service Testing of Fire Hose, Including Couplings and Nozzles ANSI/NFPA 1964-2003 喷嘴(关闭阀和端头) Spray Nozzles (Shutoff and Tip) ANSI/UL 2167-2004 消防设备用水雾喷嘴的安全标准 Standard for Safety for Water Mist Nozzles for Fire-Protection Service ANS