大倾角上运带式输送机的设计选型iitdvwhk.doc

毕业设计 张 星 晃 机械设计及其自动化 学号： 扉 页 姓名：张星晃 学号： 专业年级：机械制造及其自动化 层次：专升本 设计（论文）题目：大倾角上运带式输送机选型设计 指导老师： 摘 要 根据毕业设计任务书的要求，本毕业设计分为带式输送机的带速选择，带宽选择，输送能力计算，拖动电机的功率选择，减速器的选择，各种带式输送机保护的选择，输送机张力计算，输送带的选择，各辅助设备的选型计算，电控设备的选型计算，各部件的选择等几个部分。 在本毕业设计中，拖动减速器的选择采用了目前国际上比较先进的CST可传输控制系统，通过此控制设备可以对输送带、拖动电动机实现保护，同时，在多驱动系统中CST可传输控制系统可以更便捷的实现功率平衡，虽然初期投资较高，但良好的性价比依然是我所选择此传动设备的充分理由，该传动设备还可以实现轻载启动，避免了带载启动对电网造成的冲击和胶带“打带现象”对设备的损坏。 在此次设计中，选用胶带的保护更加齐全，可以对设备实现完备的保护，避免设备损坏。 关键词：CST、胶带保护 ABSTRACT According to requirement of assignment certificate graduates, Notebook graduates and design divid into the belt and transport the machine take quickly to select, The bandwidth is selected,Transport the ability and calculate, To the power to move generator and select, choice of gear reducer, All kinds of belts transport the choice the machine protected, transport the tension of machine and calculate, choice of conveyer belt, Every assist the type selecting of equipment is calculated, The type selecting of electronic controlled equipment is calculated, The choice of every component parts waits for a few parts. Graduate in the design in the notebook, Tow the of choice to move gear　reducer and spent at present international go to more advanced CST, May realize to electric motor of conveyer belt through the equipment of this control protect, CST the power of quicker errealization may balance, Although the investment of initial stage is higher, But good properties price than is that I the institute select the reason of this transmissin, Transmission may ought to still realize and put on record with care start, avoided pounding at to electrified wire netting, damage the equipment. In the design of notebook, The protective device is wide selection, may have protected the equipment, avoid equipment damaging. 大倾角上运带式输送机选型设计 前 言 胶带输送机是以胶带兼牵引机构和承载机构的一种连续动作式运输设备，它在矿井地面和井下运输中得到极其广泛的应用。 胶带输送机的优点是结构简单，运输能力大，工作阻力小，耗电量低。国内外的生产实践证明，胶带输送机无论在运输能力方面，还是经济方面，都是一种较先进的运输设备。 胶带输送机的缺点是胶带成本高且易损坏，故与其它运输设备相比，初