【毕业论文】φ178旋转导向钻井工具设计说明书.docVIP

西安石油大学本科毕业设计（论文） PAGE φ178旋转导向钻井工具设计及控制轴的动力学分析 摘要：　旋转导向钻井技术是现代导向钻井技术的发展方向，主要应用于大位移井、多分支井等复杂结构的井作业。本文综述了旋转导向钻井工具的国内外现状，阐明了在我国发展旋转导向钻井技术的重要性和必要性，介绍了它的工作原理及结构组成 ,指出了研制该工具的主要技术特点。调制式旋转导向钻井工具的导向执行机构是靠内外泥浆液压力差驱动的原理来实现的，这是旋转导向钻井工具能否正常工作的关键。所以，对其液压盘阀分配系统和控制轴进行分析计算，及其在井下不同工况下所受的力进行分析计算。分析了旋转导向钻井系统的井下钻井工具系统的测控方式，偏置方式和导向方式。完成了导向执行机构机械部分的设计，最后，对控制轴进行了动力学分析，并对工具进行了经济型评价和总结。 关键词：旋转导向钻井；设计；动力学分析 Design and Control of the Dynamic Analysis of Shaft of 178 mm Diameter Rotary Steerable Drilling Tool Abstract Rotary steerable drilling technology is the development of modern drilling technology-oriented direction, mainly used in extended reach well, the complex structure of multi-lateral wells in wells operating. This paper reviews the domestic and international drilling tool status, illustrates the development of rotary steerable drilling technology of the importance and necessity to introduce the working principle and its composition, that the development of the main technical features of the tool. Modulated rotary steerable drilling tool driven by the executing agency is the pressure difference between inside and outside the mud fluid-driven principles to achieve, which is whether the drilling tool to work the key. Therefore,its hydraulic disc distribution system and control valve axis analysis and calculation, and its different working conditions in underground analyzing and calculating the force. Analysis of downhole rotary steerable drilling tool drilling system monitoring and control system mode, manner and orientation bias way. Complete guide the design of mechanical parts of the implementing agencies, and finally, axis of the dynamic analysis of the control, and the tools of the economic evaluation and summary. Keywords Rotary Steerable Drilling; Design; Dynamic Analysis PAGE 42 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc294869450 第一章 绪论 PAGEREF _Toc294869450 \h 1 HYPERLINK \l _Toc294869451 1.1 本论文研究的目的、价值和意义 PAGEREF _Toc294869451 \h 1 HYPERLINK \l _Toc294869452 1.