（毕业设计论文）《电气设备的试验》.doc

毕业论文（设计） 题目：电气设备的试验 学 院： 电气工程学院 专 业： 电气工程及其自动化 学 号： 姓 名： 指导教师： 内 容 摘 要 继电保护关系着电力系统的安全和稳定，对继电保护装置的校验可以及时发现隐性故障，使保护装置运行在最佳状态。本文介绍了继电保护校验的项目及校验要求 变压器试验的主要目的是判定变压器在运输、安装过程中和运行中是否受到损伤或发生变化，以及验证变压器性能是否符合有关标准和技术条件的规定。本文着重介绍了以下试验的原理、方法和注意事项：绕组绝缘电阻的测量；绕组连同套管的介质损耗因素tgδ的测量；绕组连同套管一起的直流电阻的测量；有载调压开关的切换顺序试验；变压器绕组变形试验 电流互感器的局部放电试验能够检查绝缘局部隐形缺陷及故障。本文介绍了应用调频式串联谐振高压试验设备做电流互感器局部放电试验的原理和基本操作。 关键词：继电保护 校验 变压器 电阻 介质损耗 有载调压开关 变形 电流互感器 局部放电 Abstract The relay relationship is relating the electric power system security and stability; the check of the relay relationship device can detect hidden faults, and make it running in the best condition. This paper introduces the item and requirements of the relay relationship checking. The main purpose of the transformer test is to determine transformer in the transport, the installation process and the operation of injury or whether the changes and the validation of transformers with the relational standards and technical conditions. This paper introduces the theory, methods and attention to the matter of the following test: the winding insulation resistance measurement; the winding with bushing dielectric loss factor tgδ measurement; the winding with bushing together DC resistance measurement; the OLTC switching sequence test; the transformer winding distortion test. The PD test of the current transformer can check local insulation defects and hidden fault. This paper describes the basic principles and operation of the current transformer partial discharge test using the FM-series resonant high voltage test equipment. Key word: relay relationship check transformer resistance dielectric loss factor OLTC distortion current transformer partial discharge 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc168813688 第一章 绪论 PAGEREF _Toc168813688 \h 1 HYPERLINK \l _Toc168813689 第二章 继电保护的校验 PAGEREF _Toc168813689 \h 3 HYPERLINK \l _Toc168813690 2.1概述 PAGEREF _Toc168813690 \h 3 HYPERLINK \l _Toc168813691 2