（毕业设计论文）《感应加热电源负载匹配》.docVIP

感应加热电源负载匹配 摘 要 感应加热以其加热效率高、速度快，可控性好及易于实现机械化、自动化等优点，已在熔炼、铸造、弯管、热锻、焊接和表面热处理等行业得到广泛的应用。 文章简单介绍国内外感应加热的发展现状和感应加热中儿个重要概念，并从感应加热电源的拓扑、调功方式和如何扩容等几方面介绍了国内外感应加热电源的研究现状和发展方向。根据目前国内外高频感应加热电源发展中存在的问题，提出采用的LLC谐振拓扑，利用比较成熟的电力电子技术和锁相环控制设计完成高频感应加热电源。 在简要分析LC谐振回路的特性基础上，对LLC谐振回路的特性进行了深入的理论分析和实验研究。文章根据感应加热负载的特性和等效电路出发，以达到输出最大功率为目标，分别分析了输出电流和输出电压、输出电流和负载电流、输出电压和电容电压之间关系的幅频特性和相位特性。通过分析可知，在最大功率点处，输出电流和负载电流的比值和两个电感比值有关。 Research of Load Matching Technique for Induction Heating Power Supply ABSTRACT 【The Intermediate Frequency Induction Heating has been widely applied in melting, casting, bend, hot forging, welding, Surface Heat Treatment due to its advantages of high heating efficiency、high speed、easily controlled、easily being mechanized and automated. Firstly, it presented briefly the international induction heating development achievement nowadays,some important concepts in it and it also introduced international induction heating status in and development direction in future from the aspects as: topologies of power supply, power regulation and how to expand the capability. According the existed problems in high frequency power supply development, it presented feasibility of fulfilling the high frequency power supply used the matured power electronics technology and phase loop lock control based on improved resonant topology LLC upgrade from LC resonant topology. Secondly, the theoretical analyses and experimental studies of the characteristic of LLC resonant topology have been studied deeply in paper based on anglicizing simply LC resonant topology firstly. According the characteristic of induction heating load and equivalent circuit of it, the paper has analyze the amplitude frequency and phase character between output current and output voltage,output current and load current, output voltage and capacitor voltage respectively based on how to get to the maxim output power in load. It presented the results of the ratios between load current and output current, capacitor voltage and o