毕业论文（设计）釜山三矿1.8 Mt-a新井设计.docVIP

PAGE II PAGE I 摘要 本设计的井田面积为16km2，年产量1.8Mt/a。井田内煤层赋存比较稳定，煤层平均倾角5.3°，总共有两层煤，1#煤层、3#煤层，平均厚度为4m、5.5m。井田中部有两条断层发育，整体地质条件比较简单，设计矿井为低瓦斯矿井。根据实际的地质资料情况，进行矿井初步设计，决定采用立井单水平分层开采，设计采用一次采全高回采工艺，走向长壁采煤法和倾斜长壁采煤法，用全部垮落法处理采空区。并对矿井运输、矿井提升、矿井排水和矿井通风等各个生产系统的设备选型计算，以及对矿井的安全技术提出措施，完成整个矿井的初步设计。 关键词：走向长壁采煤法；倾斜长壁采煤法；综采工艺；通风；初步设计 Abstract The well farmland area of this design is 16 the squares be thousand metres and the year yield is 1,800,000 tons.The well coal seam inside the farmland endows with to save more stable ,the coal seam Qing Cape is 5.3,mine have two coals,1#coal,3#coal,their thicks are 4 metres,5.5metres .At the well farmland scope the west has broken growth,whole geology condition moer simple,Design the mineral well is a low gas mineral.Carry on mineral well first step a design according to the actual geoglogy data ,circumtance ,decide adopting and design an adoption comprehensive mechanize to adopt whole high craft at atime Longwall mining method and use all across to fall a method processing to adopt empty aerea . And mine transport, Mine, mine drainage and mine ventilation systems in various production equipment selection basis, and to propose measures to mine safety technology, complete the preliminary design of mine Key words: longwall mining on the strike; longwall mining to the dip or to the rise； Mechanized mining technology; Ventilation; Preliminary design 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc327168946 前言 PAGEREF _Toc327168946 \h 1 HYPERLINK \l _Toc327168947 1 矿区概况及井田地质特征 PAGEREF _Toc327168947 \h 2 HYPERLINK \l _Toc327168948 1.1 矿区概况 PAGEREF _Toc327168948 \h 2 HYPERLINK \l _Toc327168949 1.1.1 矿区地理位置 PAGEREF _Toc327168949 \h 2 HYPERLINK \l _Toc327168950 1.1.2 交通条件 PAGEREF _Toc327168950 \h 2 HYPERLINK \l _Toc327168951 1.1.3 矿区地形、地貌 PAGEREF _Toc327168951 \h 3 HYPERLINK \l _Toc327168952 1.1.4 气候条件及地震情况 PAGEREF _Toc327168952 \h 3 HYPERLINK \l _Toc327168953 1.1.5 电源、水源及建筑材料来源 PAGEREF _Toc327168953 \h 4 HYPERLINK \l _Toc327168954 1.2 井田及其附近的地质特