vhdl的设计三层电梯控制程序.docVIP

library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_arith.all; use ieee.std_logic_unsigned.all; entity lift is port(clk,reset,up1,up2,down2,down3,stop1,stop2,stop3,checkow:in std_logic; --buttons uplight,downlight,stoplight:buffer std_logic_vector(3 downto 1); udmode:buffer std_logic; --0- 电梯处于上升模式，1-电梯处于下降木模式 position:buffer integer range 1 to 3; --电梯位置 doorlight: out std_logic; --电梯门开关灯 loc: out std_logic_vector(6 downto 0); --显示电梯位置 ss: buffer integer range 0 to 3; --电梯所处状态--0--上升--1-下降--2停止 out_state