第六章节发动机冷却系统.pptVIP

Chapter 6 cooling system 组长：林锡平 组员：彭大龙、陈志成、苏锐伟、林天明、林利森 contents the overview and the function the classification composition working principle Transmission oil cooling system summary 一、The overview and function The overview：The engine in the combustible mixture in the combustion process, the gas inside the cylinder temperature can be as high as 2000 ℃-2500 ℃, directly with the high temperature gas contact parts (such as a gas cylinder, cylinder head, valve etc.) if not timely cooling, probably because of the high temperature parts as a result of its mechanical strength is reduced or even destroy. Therefore, in order to ensure the normal work of the engine, must be cooled in the high temperature working parts. Function：Cooling system makes the engine gets a modest cooling, and maintain its optimum operating temperature range 二、The classification According to the cooling medium, automotive engine cooling mode has two kinds, namely water cooling and air cooling. Now automotive engine generally uses the water cooling. （一）、The water cooling system Composition：The water cooling system is made of radiator, fan, water tank, pipes, the water pump and cooling water etc. /v_show/id_XMzE4NDM5Mzky.html 2、Water pump Function: The cooling water pressure,so that in the cooling system of circulating flow. Common water pump is a centrifagal pump the fan is acoaxial driving. Centrifugal pumps working principle 3、Fan Function: Improve the air svelocity and flow, enhance the radiator cooling capacity, At the same time for other accessories of engine also to have certain cooling effect. Type: axial flow and centrifugal. 4、 Thermostat Function: according to the engine load size and level of the water temperature, Automatically change the water cycle flow route, so as to control the flow of the cooling water through the radiator. Type: wax type、 folding ether （二）、The wind cooling system 三、Transmission oil cooling system The reason：In automatic transmission, the oil for work