Qt编程打电话和发短信.docVIP

Qt编程：打电话和发短信 一、图像界面如下： （主界面） （打电话界面） （发短信界面） 二、总体代码如下 //UARTIO.H #ifndef UARTIO_H #define UARTIO_H int open_uart(char *fname); int set_uart_speed(int fd, int speed); int set_uart_parity(int fd, int databits, int stopbits, int parity); ssize_t read_uart_timeout(int fd, void *buf, size_t count, int timeout); #endif //UARTIO.cpp #include termios.h //涓插彛澶存枃浠? #include sys/stat.h #include sys/fcntl.h #include unistd.h #include string.h int __speed_table[] = { B115200, B57600, B38400, B19200, B9600, B4800, B2400, B1200, B300,}; int __name_table[] = {115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200, 300,}; //鎵撳紑涓插彛鍑芥暟锛屽弬鏁颁负涓€涓插彛璁惧鏂囦欢鍚? int open_uart(char *fname) { struct termios term_opt; int fd; fd=open(fname,O_RDWR|O_NOCTTY); if (fd == -1) return -1; bzero(term_opt, sizeof(struct termios)); //defalut settings cfmakeraw(term_opt); term_opt.c_cc[VTIME] = 0; term_opt.c_cc[VMIN] = 0; if (tcsetattr(fd,TCSANOW,term_opt) != 0) { close(fd); return -1; } tcflush(fd, TCIOFLUSH); return fd; } //璁剧疆涓插彛閫熺巼 int set_uart_speed(int fd, int speed) { int i,j; int ret; struct termios term_opt; tcgetattr(fd, term_opt); j=sizeof(__speed_table)/sizeof(int); for (i= 0;ij/*sizeof(__speed_table)/sizeof(int)*/;i++) { if (speed==__name_table[i]) { tcflush(fd, TCIOFLUSH); cfsetispeed(term_opt, __speed_table[i]); cfsetospeed(term_opt, __speed_table[i]); ret=tcsetattr(fd, TCSANOW, term_opt); if (ret != 0) return -1; tcflush(fd,TCIOFLUSH); break; } } return 0; } //璁剧疆鏍￠獙 int set_uart_parity(int fd,int databits,int stopbits,int parity) { struct termios term_opt;