芯片资料-FT232.pdfVIP

FT232BM USB UART ( USB - Serial) I.C. nd The FT232BM is the 2 generation of FTDI’s popular USB UART I.C. This device not only adds extra functionality to its FT8U232AM predecessor and reduces external component count, but also maintains a high degree of pin compatibility with the original, making it easy to upgrade or cost reduce existing designs as well as increasing the potential for using the device in new application areas. 1.0 Features HARDWARE FEATURES • Single Chip USB Asynchronous Serial Data VIRTUAL COM PORT (VCP) DRIVERS for Transfer - Windows 98 and Windows 98 SE • Full Handshaking Modem Interface Signals - Windows 2000 / ME / XP • UART I/F Supports 7 / 8 Bit Data, 1 / 2 Stop Bits - Windows CE 4.2 and Odd/Even/Mark/Space/No Parity - MAC OS-8 and OS-9 • Data rate 300 = 3M Baud (TTL) - MAC OS-X • Data rate 300 = 1M Baud (RS232) - Linux 2.40 and greater • Data rate 300 = 3M Baud (RS422/RS485) D2XX (USB Direct Drivers + DLL S/W Interface) • 384 Byte Receive Buffer / 128 Byte Transmit Buffer - Windows 98 and Windows 98 SE for high data throughput - Windows 2000 / ME / XP • Adjustable RX buffer timeout - Windows CE 4.2 • Fully Assisted Hardware or X-On / X-Off - Linux 2.40 and greater Handshaking APPLICATION AREAS • In-built support for event characters and line break - USB RS232 Converters condition