开关电源--OB2268C_DataSheet.pdf

OB2268C Current Mode PWM Controller The tone energy at below 20KHZ is minimized in GENERAL DESCRIPTION operation. Consequently, audio noise performance is OB2268C is a highly integrated current mode PWM greatly improved. OB2268C is offered in both SOP-8 and DIP-8 control IC optimized for high performance, low standby power and cost effective offline flyback packages. converter applications. FEATURES PWM switching frequency at normal operation is externally programmable and trimmed to tight range. ■ Extended Burst Mode Control For Improved At no load or light load condition, the IC operates in Efficiency and Minimum Standby Power Design extended ‘burst mode’ to minimize switching loss. ■ Audio Noise Free Operation Lower standby power and higher conversion ■ External Programmable PWM Switching efficiency is thus achieved. Frequency VDD low startup current and low operating current ■ Internal Synchronized Slope Compensation contribute to a reliable power on startup design with ■ Low VIN/VDD Startup Current(6.5uA) and Low OB2268C. A large value resistor could thus be used Operating Current (2.3mA) in the startup circuit to minimize the standby power. ■ Leading Edge Blanking on Current Sense Input The internal slope co