铸造工艺--毕业论文设计.docVIP

PAGE PAGE I 摘要 首先，分析零件的技术条件，明确零件的材料组成以及性能要求。对零件结构的铸造工艺性进行分析，明确零件的结构特点，找出可能存在的结构问题。提出改进措施或预防缺陷的措施。其次,根据零件结构特点，技术要求，生产要求，生产批量，生产条件选择铸造及造型方法。由零件的结构特点，提出多种浇注和分型方案，综合对比分析，选择最为理想的浇注位置及分型面。制定出详细的铸造工艺方案。再次,根据铸造工艺方案和零件的特点，选用适宜的工艺参数，设计铸件的补缩系统，浇注系统。绘制出铸造工艺图。最后,设计铸造工艺装备，包括模板和芯盒,绘制模板和芯盒的装配图。 关键字：铸造工艺性 ；铸造工艺方案 ；铸造工艺参数 ；补缩系统；浇注系统 Abstract First of all, I analyse the technical conditions of the parts to clear the material composition and performance requirements of parts ,analyse the casting process of the part structure to clear the structural features of parts ,identify possible structural problem and propose measures to improve the structure of parts or the prevention of defective。Secondly, According to structural characteristics of parts, technical requirements, production requirements, production volume, production conditions I choose methods of casting and modeling. According to the structural characteristics of components, I develop a variety of pouring and parting programmes, analyse comprehensively and comparatively, choose the best pouring position and parting plan and develop a detailed programme of casting process. Again,according to the programme and structural characteristics of parts, I select the appropriate technical parameters , design feeding system and pouring system.of the casting ,map out the casting process plans. Finally, I design the casting process equipment, including the templates and core-boxes and draw the assembly plans of template and core-box . Keyword: Casting process；Casting process programme； Casting process parameters；Feeding system ；Cating system TOC \o 1-3 \h \z \u HYPERLINK \l _Toc200980401 摘要 PAGEREF _Toc200980401 \h I HYPERLINK \l _Toc200980402 Abstract PAGEREF _Toc200980402 \h II HYPERLINK \l _Toc200980403 绪论 PAGEREF _Toc200980403 \h 1 HYPERLINK \l _Toc200980404 1 零件材料性能分析 PAGEREF _Toc200980404 \h 2 HYPERLINK \l _Toc200980405 2 零件结构的铸造工艺性分析 PAGEREF _Toc200980405 \h 3 HYPERLINK \l