国际会议演讲稿.docVIP

1. Introduction Good afternoon, Ladies and gentlemen.I am honored to have been invited to speak at this conference. I am a PhD student from XXX and currently doing some research on Instrument Science and Technology.Today, my topic is Conceptual Design of an Evaluation Device for Power Test of Explosives.The content of this presentation is divided into 4 parts: in section 1, I will introduce the Research Status Quo of some existing methods for power test at Home and Abroad; in section 2, I will give the overall design and testing principle of the device; the mathematical model and simulation results will be showed in section 3; and finally, I will make a conclusion. Before entering the theme,lets look at what is the power of explosives.The sum of mechanical work to surrounding medium by explosion is called power of explosives, which reflects the ability of the expanding gas produced by explosion and is also an important indicator for evaluating the performance of explosives. 2. Body Section 1:Research Status Quo at Home and Abroad These are some existing methods for power test of explosives： lead-cast method 2)blasting funnel method 3)ballistic mortar method 4)underwater explosion method 5)ballistic projectile method Let’s look at the advantages and disadvantages of two typical methods for power test.The lead-cast method is the first standard method in the world.It is easy to operate and does not require specialized test equipment.However,the little test quantity of explosives,the physical properties as well as different manufacturing processes of lead-cast result in a larger experimental error.In addition,the lead-cast is disposable and high cost,therefore the international community adopts the underwater explosion method as well.This method can not only test large quantity of explosives,but also has a good reproducibility of experimental data.However,the test system of underwater explosion requires large initial investment,complex experiment,high test cost and