《燕尾夹（钣金部分）冲压级进模具设计》毕业学术论文.doc

毕业设计（论文） 毕业设计 题 目： 燕尾夹（钣金部分）冲压级进模具设计 摘 要 冲压是通过模具使板材产生塑性变形而获得成品零件的一种成形方法。冲压模广泛应用于金属制品的各行业中，尤其是在工业设计和与人们生活相关的方面，在汽车、仪表、军工、家用电器等工业中占有及其重要的地位。本文对燕尾夹级进模进行设计，主要介绍了冲压模具设计的一般过程。随着与国际接轨的脚步不断加快，市场竞争的日益加剧，人们已经越来越认识到产品质量、成本和新产品的开发能力的重要性。而模具制造是整个链条中最基础的要素之一，模具制造技术现已成为衡量一个国家制造业水平高低的重要标志，并在很大程度上决定企业的生存空间。 冲压模具的设计充分利用了机械压力机的功用特点，在室温的条件下对坯件进行冲压成形，生产效率提高，经济效益显著。本课题研究燕尾夹冲压件的模具设计，采用级进模设计。对结构简单实用的模具进行设计，对类似工件的大批量生产具有一定的参考作用。本文结合燕尾夹零件的结构、工艺性来分析设计燕尾夹模具结构、工艺性及工作原理，进行必要的计算，确定基本的参数、设计主体结构、排样图、工作零件、卸料装置、导料装置、安全装置、画装配图、零件图、编制模具零件加工工艺规程等。 本设计是燕尾夹零件冲裁模具的设计，掌握模具工艺设计和模具结构设计的方法和步骤，掌握制造加工工艺的编制技术，进行燕尾夹的设计，学习应用先进的方法，完成此课题的设计。 关键词：冲压；工艺性；结构设计；模具制造; 模具；设计； Abstract Punching through the sheet metal molds to produce plastic deformation and was finished forming part of a method. Stamping Die widely used in metal products in all sectors, especially in industrial design and related aspects of people's lives, in the automotive, instrumentation, military, household appliances and other industrial and occupy an important position. In this paper, a simple electronic lock reduction in the film Die design, mainly on the general stamping die design process. With international standards and accelerating the pace, the increasing market competition, people have become increasingly aware of product quality, cost and new product development capability of the importance. And die manufacturing is a whole chain of one of the most basic elements; mold manufacturing technology has now become the manufacturing sector of a country’s level of the important signs and to a large extent determines the survival of enterprises. Stamping die design makes full use of the function of the characteristics of the mechanical press, at room temperature under the condition of the blank for stamping, production efficiency, and cost-effectiveness significantly. The research reset-stamping parts of the mold design, by blanking die design. The structure is simple and practical design of the mold, similar to parts of the mass prod