工业工程专业英语Chapter-2-Work-Study.pptVIP

Chapter 2 Work Study Unit 1 Method Study Unit 2 Time study Unit 3 Time Measurement Methods Unit 4 Work Sampling 计划学时：4学时 教学内容： 3学时，精读，逐句翻译，掌握专业词汇 Method Study 1学时，泛读，了解文章大意，掌握专业词汇，翻译重点语句 Unit 2 Time study Unit 3 Time Measurement Methods Unit 4 Work Sampling 教学要求： 工作研究和作业测定是工业工程领域最传统的研究内容。 通过本章的学习，对工作研究和作业测量有一个全面的认识和了解。 本章共两次作业（作业3，作业4） 本章专业词汇 Unit 1 Methods Study The Definition and Content of Methods Study Steps of Methods Study The Classifications of Methods Study Principles of Motion Economy Introduction to Work Study 2.Steps of Methods Study Selecting—the work to be studied boundaries to be defined. Recording—the relevant facts about the job to be recorded. Examining and developing—the way the job to be performed. Six questioning techniques Analysis with “ECRS” principles 3. Classifications of Methods Study There are three main classes of methods study: process analysis operation analysis motion analysis. Process Analysis Process analysis is one of the main contents of methods study, by which researchers can completely observe and record the whole production processes and carry out integrated analysis from a macroscopic viewpoint. Operation Analysis Man-machine Operation Analysis Construction of the Man-machine Chart Two-hand Process Analysis Motion Analysis 4.Principles of Motion Economy I Principles related to the use of human body II Principles related to the arrangement of work place Ⅲ Principles related to tools and equipment 作业3： 重点语句翻译（把下列语句翻译成中文） The work study is integrative technology of engineering and management which can increase the ratio of output investment or with little investment, so it has been paid the general attention of the industrial circle for along time. “Ballistic” (i.e. free swinging) movement are faster, easier and more accurate than restricted or controlled movements. 作业3： 课外翻译（把下列语句翻译成中文） Armed with economic models tailored to specific technologies, industrial engineers are able to measure, for instan