SAEJ2521V001(盘式制动器噪声).pdfVIP

SURFACE ISSUED VEHICLE J2521 MAY2001 STANDARD Issued 2001-05 400 Commonwealth Drive, Warrendale, PA 15096-0001 Submitted for recognition as an American National Standard Disc Brake Dynamometer Squeal Noise Matrix Foreword—A dynamometer test procedure known as AK Noise has been developed by a European working group that includes car manufacturers, braking system suppliers and friction material companies. This procedure follows the lines of the drag mode test procedures with an extension to include deceleration braking. In the US, a common approach is to use deceleration mode procedures emphasizing the replication of vehicle road test. As we see a strong need for a global standardization of squeal noise dynamometer tests, a global squeal matrix has been developed that combines drag mode and deceleration mode tests. This procedure was presented to the SAE working group in February 1999. Based on the AK drag, deceleration, and friction characterization modules, the matrix contains 25 sections and 1917 brake applications. This procedure owes much to the previous development of the AK procedures. This prior work is gratefully acknowledged. 1. Scope—This procedure is applicable to high frequency squeal type noise occurrences for passenger car and light truck type vehicles that are used under conventional operating conditions. The procedure does not encompass the consequences associated with changes in envi