TDE MACNO变频器DZBL变频器说明书使用手册英文版.pdf

Rev. 4.2 27/06/01 INDEX 1. GENERAL SAFETY INFORMATION 1-1 1.1 WARNINGS1-2 2. TECHNICAL DATA2-1 2.1 TECHNICAL POWER CHARACTERIST ICS2-1 2.2 TECHNICAL CHARACTERISTICS OF REGULATION 2-3 2.3 OVERALL DIMENSIONS2-4 2.3.1 S1 and S2 TIZ Series 2-4 2.3.2 S1 DZBL Series2-5 2.3.3 S2 DZBL Series2-6 3. INSTALLATION 3-1 3.1 CONVERTER INSTALLATION INSTRUCTIONS3-1 3.2 ENCLOSED ENVIRONMENT , DISSIPATED POWER3-2 3.3 VENTILATION3-2 3.4 FUN CONNECTION3-4 3.5 MAINS CONNECTION3-4 3.6 MOTOR CONNECTION3-4 3.7 THE FREQUENCY CONVERTER’S GROUND CONNECTION 3-4 3.8 ANTI-INTERFERENCE MEASURES 3-5 4. POWER CIRCUIT DESIGN 4-1 4.1 CABLES, FUSES, LINE IMPEDANCE AND BRAKING RESISTANCES4-1 4.2 MOTOR4-2 5. CONNECTION SUGGESTIONS USING DEFAULT PARAMETERS 5-1 5.1 SPEED REFERENCE FROM EXTERNAL POTENTIOMETER5-1 5.2 SPEED REFERENCE FROM DIGITAL POTENTIOMETER5-2 6. TERMINAL BLOCK 6-1 6.1 PHYSICAL LAYOUT 6-1 6.2 POWER TERMINAL BLOCK 6-1 6.3 CONTROL TERMINAL BLOCK 6-2 6.4 SPEED SENSOR INPUT (M2)6-3 6.4.1 Resolver6-3 6.4.2 Sinusoidal Encoder6-4 6.4.3 Motor thermal contact6-4 6.5 SERIAL LINE CONNECTOR (J1 CONNECTOR)6-5 6.6 SIMULATED ENCODER (J2 CONNECTOR)6-5 6.6.1 CONFIGURATION OF THE ENCODER SIMULATION OUTPUT ( J2 CONNECTOR ) 6-6 7. LOGIC INPUTS7-1 7.1 POSSIBLE CONNECTIONS7-1 7.2 ELECTRICAL CHARACTERISTICS7-1 8. LOGIC OUTPUTS8-1 8.1 POSSIBLE CONNECTIONS8-1 8.2 ELECTRICAL CHARACTERISTICS8-1 9. SETTING UP9-1 9.1