依尔通(Emotron)VSA使用说明书英文.pdf

Emotron VSA Variable Speed Drive Instruction manual English Quick Start Guide This guide is designed to assist in installing and running the • If the direction of the motor is incorrect: variable speed drive to verify that the drive and motor are working properly. Starting, stopping and speed control will • Press the key, turn off the AC power supply. Once be from the keypad. If your application requires external Power indicator LED is off, change over theT1 and T2. control or special system programming, consult the VSA • Apply power again and press the key and check the Instruction Manual supplied with your variable speed drive. motor operation direction. Step 1 Before starting the VSD Step4 Check full speed at 50Hz/60Hz Please refer to the chapters Preface and Safety Precautions in the VSA Instruction Manual. Verify that the drive is • Change the frequency with the or and please installed in accordance with the procedures described in the press the key to confirm the setting. chapter Environment description and installation. If not, do not start the drive until qualified personnel have corrected • Set frequency to 50Hz/60Hz according to the above reg- the installation. (Failure to do so could result in serious ulations. injury.) • Press the key, inspect the motor operation as motor • Check VSD and motor namepl