冷弯薄壁型钢构件卷边槽形截面畸变屈曲的研究.docVIP

冷弯薄壁型钢构件卷边槽形截面畸变屈曲的研究 　　摘要：冷弯薄壁型钢开口截面构件受力过程中除出现局部屈曲和整体屈曲外，还可能出现另外一种畸变屈曲模式，畸变屈曲以及其与局部屈曲、整体屈曲的相关作用会降低构件的极限承载力，改变构件的受力性能。所以研究畸变屈曲的发生条件有很重要的现实意义。本文采用CUFSM软件，对槽型冷弯薄壁型钢进行分析研究。依据分析结果提出畸变屈曲的发生和型钢腹板宽厚比bw/t和腹板翼缘比bf/bw的关系，以指导设计研究工作。 　　Abstract： The distortional buckling may occur for cold-formed thin-walled steel open cross-section members except local buckling and overall buckling. The distortional buckling and interaction with local and overall buckling may decrease the ultimate load-carrying capacity of members and change mechanical properties. So it is essential to research the happen conditions o