轴压比对RC框架实现强柱弱梁的影响研究-世界地震工程.PDF

26, 3 Vo.l 26 No. 3 2010 9 W ORLD EARTHQUAKE ENGINEER ING Sep. 2010 : 100 - 6069( 2010) 03- 0096- 06 RC 1 1, 2 1, 2 1 王素裹 , 韩小雷 , 季 静 , 吴培烽 ( 1. , 510640; 2. , 510640) : , ABAQUS RC , , , , ; ; , , , : ; ; ; ; : TU202; TU32; P31595 : A The influence of axial com pression ratios on the strongcolum n and weakbeam actualization of RC fram es 1 1, 2 1, 2 1 WANG Suguo , HAN X iaolei , JI Jing , WU Peifeng ( 1. School of CivilEngineering and Transportation, South China University ofT echnology, Guangzhou 510640, China; 2. State Key Laboratory of Subtropical Building Science, South China University ofT echnology, Guangzhou 510640, China) Abstract: A s slab reinforcement w illm ake the longitud inal beam overstrengthen in castinp lace RC frame struc tures, a series of RC frame structuresw ith different axial compression ratios are smi ulated byABAQUS. The influ ences of axial compression ratios on the participation extent of the slab reinforcement in longitud inal beam over strength are studied. The actualization of strongcolumn and w eakbeam ph ilosophy is analyzed in the RC frame structuresw ith different axial compression ratios and at d ifferent connections. The occurring condition of a plastic hinge at beam end is discussed. It ind icates that the axial compression ratios can greatly influence the participation extent of the slab reinforcement and it is easier for the occurring of plastic h inges at beam end in the RC frame structuresw ith low axia