高压内啮合齿轮泵关键技术研究-机械设计及理论专业论文.docxVIP

- - III - leakage and resistance of components are relative to the roughness of components.Basedon the analysis of the effect of the leakage and friction of fluid caused by the roughness of components,the optimal roughness for the least leakage and friction of fluid was determined. The external gear was deformed by the pressure on the radial face,which influence the dimension and the flow rate of internal pump.The difference of the flow rate caused by the deformation of the external gear was obtained by regarding the deformation of external gear as deflection coefficient. Key Words：Internal pu