SHT3中文资料.pdfVIP

SHT30 温湿度传感器部分翻译资料 3 Pin Assignment 3、引脚分配 The SHT3x-DIS comes in a tiny 8-pin DFN package see Table 6. SHT3x-DIS 是一个8 位的DFN 小包，见表6 3.1 Power Pins (VDD, VSS) 3.1、电源引脚 （VDD, VSS ） The electrical specifications of the SHT3x-DIS are shown in Table 3. The power supply pins must be decoupled with a 100 nF capacitor that shall be placed as close to the sensor as possible – see Figure 11 for a typical application circuit. SHT3x-DIS 的电气参数如表3 所示。电源引脚必须与一个 100nF 的电容器尽可能地隔离， 以便尽可能靠近传感器——请参见典型应用电路图11。 3.2 Serial Clock and Serial Data (SCL, SDA) 3.2、串行时钟和串行数据