毕业论文-J8II作动筒工艺及工装设计.docVIP

l 摘 要 本设计说明是J8II作动筒工艺及工装设计。 说明书包括零件图的工艺分析（其中包括零件的技术条件分析；材料及其切削特性的分析和零件的工艺性分析）；毛坯的设计（其中包括毛坯种类的确定；毛坯的工艺要求：毛坯的余量和公差等）；工艺规程设计（其中包括工艺路线的制定；工序尺寸的制定）。还有主要表面的加工方法及其表面质量和尺寸精度的保证方法。热处理工序和辅助工序的安排，零件的化学成分，机械性能及零件在主机上的作用及工作环境等内容。 夹具内容是磨槽夹具设计和珩磨夹具的设计。有设计方案，总体说明，夹具的构造特点及原则，夹具体的设计（包括夹具体毛坯构造的选择，引导装置的设计，定位装置的设计，夹具体外廓尺寸的设计等方面）。还包括定位，夹紧方案的选择，定位元件的选择，硬度及配合性质以及误差计算等内容。 铰刀的设计。有铰刀的构造(包括刀具材料的选择，前导、后导、柄部和切削部分的设计)，铰刀主要结构要素和铰刀切削刃的设计。还包括制造精度，技术要求和切削液的选择。 最后是加工经济性分析。 关键词：基准；加工余量；工艺规程；夹具设计；铰刀设计。 Abstract This design is that J8II actuator tube technology and tooling design. Manual include the analysis of the technology of drawing (including the technical conditions of the parts, materials and its cutting analysis the paper analyses the characteristics of the analysis of technology and parts); Blank design (including blank kinds of determined, and blank process requirement: blank headroom and tolerance); Process planning (including the process route for the size of the working procedure; set). And the major surface processing method and its surface quality and precision of the method that size.Heat treatment process and auxiliary process arrangement, parts of the chemical composition, mechanical properties and parts in the host role and working environment, etc. Fixture content is grinding groove clamp design and honing the design of fixture. There is a design scheme, overall, the structure of the fixture that characteristics and principle, the design of concrete (including clip with the choice of structural concrete blank, guide device design, the design of the positioning device, the size of the profile of in vitro fixture design, etc). Also includes positioning, clamping choice, the choice of location, hardness and components with nature and error calculation, etc. Reamer design. A reamer structure (including the cutting tool material choice, leading, guide, handle department and after cutting part of the design), the main structural elements and reamer cutting edge design. Also includ