毕业论文-毕业设计外文翻译--基于msp430的温度控制设计（外文原文+中文翻译）.docVIP

外文翻译 外文文献：　 Embedded Systems Design using the TI MSP430 Series（selection） This book is intended for the embedded engineer who is new to the field, and as an introduction and reference for those experienced with micro-controller development, but are new to the MSP430 family of devices. I have assumed that the reader has some experience with microcontroller-based design, either professionally or academically. As an example, the book de- scribes interrupt functionality in detail, but assumes that you, the reader, already know what an interrupt is and how to use it. It is also important to note that, while much of the information in this book is identical to that which is available from the TI documentation, this book is intended to supplement, not replace that valuable source of information. The Users Guides and Application Notes together offer a depth and breadth of technical information that would be difficult to replicate in a single source. The intent of this book is to highlight some of the most commonly used information, along with some helpful suggestions and rules of thumb. The MSP430 Family The MSP430 family is a broad family of low power, feature rich 16-bit microcontrollers from Texas Instruments. They share a common, RISC-type, Neumann CPU core. The 430 is competitive in price with the 8-bit controller market, and supports both 8 and 16-bit instructions, allowing migration from most similarly sized platforms. The family of devices ranges from the very small (1k ROM, 128 bytes for RAM, sub-dollar) up to larger (60k ROM, 2k RAM, with prices in the $10 range) devices. Currently, there are at least 40 flavors available, with more being added regularly. The devices are split into three families: the MSP430x3xx, which is a basic unit, the MSP430x1xx, which is a more feature-rich family, and the MSP430x4xx, which is similar to the 1xx, with a built in LCD driver. You will find these referred to as 1xx, 3xx, and 4xx devices throughout this book. Part Numbering C