积层式铁氧体大电流晶片电感.PDF

Multilayer Ferrite Power Chip Inductor 積層式鐵氧體大電流晶片電感 INTRODUCTION 產品介紹 Multilayer chip power inductors are SMD components that possess a ultra-low DC resistance and low profile. This component can keep low inductance variation in high current application. Therefore, it is suitable in DC-DC converter. 積層式大電流晶片電感係表面黏著式晶片，具極低直流電阻及薄型化元件高度。於大電流使用下仍具低電感量變 化，所以適用於 DC-DC 轉換器。 FEATURE 特色 1. 0.9 mm in height, which is suitable for low-profile applications. 高度 0.9 mm ，符合低高度之應用。 2. Comparing with a winding type, this series is small, low height, and high efficiency. 相較於繞線式電感，此系列產品具有小尺寸、薄型化及高效率的特性。 3. Stable low DC resistance. 有穩定的低直流電阻。 4. No cross coupling between inductors due to the complete magnetic shield, which is suitable for high dense printed circuit boards.  經由完整的磁性迴路，電感間無交互耦合現象，適合高密度之印刷電路板。 APPLICATION 適用產品 DC-DC converters and power modules can be applied in the following products. For example, cellular phone, DSC, DVC, PDA, DVD and HDD. 適用於手機、DSC 、DVC 、PDA 、DVD 及 HDD 等 DC-DC 轉換器及電源模阻。 Max Echo reserves the rights for revising the content of this catalog without further notification. 155 鈺鎧保留更改此目錄中任何內容之權利，而不再另行通知。 Multilayer Ferrite Power Chip Inductor 積層式鐵氧體大電流晶片電感 SIZE AND DIMENSION 尺寸和邊長 外電極 鐵氧體 SIZE 尺寸 L 長 mm W 寬 mm T 厚 mm a 銀寬 mm 201209 (0805) 2.0±0.2 1.25±0.2 0.9±0.1 0.3~0.7 201609 (0806) 2.0±0.15 1.6±0.15 0.9±0.1 0.3~0.7 252009 (1008) 2.5±0.2 2.0±0.2 0.9±0.1 0.4~0.8 PART NUMBER SYSTEM 編碼系統 PCL S 2016 1R0 M Inductance Tolerance 電感值公差 G – ±2% J – ±5% K – ±10% M – ±20% Inductance Value Code 電感值碼