- 1、本文档共4页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
Airblock扩展包激光切割制作-Makeblock
makeblock 创客工场
Airblock扩展包激光切割制作指南
Airblock Add-on Pack Laser Cut Producing Guide
适合年龄 8+
Part 1测试板 ⚠ Airblock 扩展包(以下称扩展包)将以开源形式提供扩展包制作图纸和调试文件,为您的创造提供完整支持。
Test Board
Airblock add-on pack(hereinafter referred to as add-on pack) would provide open souce add-on
pack prodution drawings and debug files to provide fully support to your creation.
Step1: 注:测试板文件包含两块测试板(测试板A,测试板B)
Notice: The test board doucument contain two
test boards( test board A, test board B)
首先制作测试板
First, to make a test board.
选择“扩展包零件制作文件包”,进入“激光制作文件”文件夹,打开测试板制
作文件,制作测试板。
Select Add-on parts making instructions fileenter Laser Producing 测试板A: 测试板B:
板厚刻度板 实际使用的木板
Documents folder, and open the test board producing documents to Test board A: Test board B:
make the test board. thickness scale plate the actual used board
Step2:
测试木板,选择合适制作文件
To test the board, select the suitable producing document.
测试板厚
Test the thickness of the board.
测试板切割好之后,将测试板B放置于测试板的刻度卡槽中,对比松紧度(
文档评论(0)