AlZn-Mg-Cu系铝合金厚板冷轧过程中的织构演变-IngentaConnect.PDFVIP

A-l Zn-Mg-Cu 1 Al-Zn-Mg-Cu T exture Evolution of A-l Zn- Mg- Cu Aluminum Alloy Plate During Cold Rolling , , ( , 10009 ) CHEN Jun-zhou, HUAN G Min, DAI Sheng-long ( Beijing Institute of Aeronautical M aterials, Beijing 10009 , China) : A-l Zn-Mg-Cu : {001} 110, Bs, S, Cu ; 1/ 4 Bs, S, Cu , { 001} 110 Cu = 90{ 001} 110, Bs = 3 1 1 , { 001} 110 : ; ; ; : T G 113 : A : 1001-4381(2011) 0 -0001-06 Abstract: T he evolution of through-thickness texture in A-l Zn-Mg-Cu aluminum alloy plate during cold rolling w as investigated by using electron backscattered diffraction ( EBSD) technique. The re- sults show that shear type texture { 001} 110near the surface of the plate tends to rotate towards a typical rolling texture consisted of Bs, S and Cu components w ith the reduction, w hile, at the quarter and the center of thickness, typical rolling texture rotates towards the { 001} 110orientation. Shear strain is the prime reason resulted in the transition from rolling texture to shear type texture. With the shear strain, Cu and Bs orientation rotates towards {001} 110along 1= 90and 1= 3 , respectively. Key words:aluminum alloy; cold rolling; texture; EBSD , , [ 1- 10] Liu[ 4] AA 70 AA 182 , , Bs, S Cu, Liu[ ] 1 , 22. ND , , 22. ND 70 -T77 1 , Cu, S , Bs 19mm, 1T77 1 Chow dhury[ 6] , { 001} , , 100, , {001} 100 , 477/ 1h,